[
{
    "name": "systemName",
    "label": "System name",
    "type": "string",
    "default": "OBPkeypad61",
    "check": "checkSystemName",
    "description": "System name, used also for the access point SSID.",
    "category": "System"
},
{
    "name": "logLevel",
    "label": "Log level",
    "type": "list",
    "default": "0",
    "list": [
        {"l":"Off (0)","v":0},
        {"l":"Error (1)","v":1},
        {"l":"Warning (2)","v":2},
        {"l":"Info (3)","v":3},
        {"l":"Debug (4)","v":4},
        {"l":"Verbose (5)","v":5}
    ],
    "description": "Log level at the USB port.\nHigher level means more output.",
    "category": "System"
},
{
    "name": "adminPassword",
    "label": "Admin Password",
    "type": "password",
    "default": "esp32admin",
    "check": "checkAdminPass",
    "description": "Set the password for config modifications",
    "category": "System"
},
{
    "name": "useAdminPass",
    "label": "Use Admin-Pass",
    "type": "boolean",
    "default": "true",
    "description": "A password for config modifications is required.",
    "category": "System"
},
{
    "name": "apPassword",
    "label": "Wifi password",
    "type": "password",
    "default": "keypad61",
    "check": "checkApPass",
    "description": "Set the password for the Wifi access point.",
    "category": "Wifi",
    "capabilities":{"apPwChange":["true"]}
},
{
    "name": "apIp",
    "label": "AP IP-Address",
    "type": "string",
    "default":"192.168.15.1",
    "check": "checkApIp",
    "description": "The IP address for the wifi access point.\nClients will get addresses within the same subnet.",
    "category":"Wifi"
},
{
    "name": "apMask",
    "label": "AP Net-Mask",
    "type": "string",
    "default": "255.255.255.0",
    "check": "checkNetMask",
    "description": "The network mask for the access point.",
    "category": "Wifi"
},
{
    "name": "stopApTime",
    "label": "AP time off",
    "type": "number",
    "default": "0",
    "min": 0,
    "max": 60,
    "check": "checkMinMax",
    "description": "Stop the access point after that many minutes if not used.\n1 to 60 minutes.\n\n'0' means that the access point is permanently enabled.",
    "category": "Wifi"
},
{
    "name": "cpuSpeed",
    "label": "CPU Speed [MHz]",
    "type": "list",
    "default": "160",
    "list": [
        "80",
        "160",
        "240"
    ],
    "description": "CPU speed in MHz [80|160|240].\nSlower speed means less power consumption.",
    "category": "Hardware"
},
{
    "name": "ledBrightness",
    "label": "LED brightness",
    "type": "number",
    "default": 64,
    "min": 0,
    "max": 255,
    "description": "The brightness of the destination leds (0..255).",
    "category": "Hardware"
},
{
    "name": "ledRgbBrightness",
    "label": "RGB-LED brightness",
    "type": "number",
    "default": 64,
    "min": 0,
    "max": 255,
    "description": "The brightness of the rgb status led (0..255).",
    "category": "Hardware"
},
{
    "name": "tempFormat",
    "label": "Temperature Format",
    "type": "list",
    "default": "C",
    "list": [
        "K",
        "C",
        "F"
    ],
    "description": "Temperature format: Kelvin, Celsius or Fahrenheit [K|C|F].",
    "category": "Units"
}
]