# structure
# below config we define the structure to be displayed
# basically there are 2 object types:
#   children - a list of cfg objects that define the inputs to be shown
#              if the parent is selected
#              parameters:
#                 key: unique key - defines the name(part) in the cfg
#                      if not set a potential "value" is taken
#                      null (empty) is a valid key
#                 label: title to be shown, if unset key will be used
#                 resorce: a resource that is used by the value children
#                          simple string use as is
#                          string + ':' - add value to the resource
#                 type: if empty or 'frame' only the children are considered
#                 children: only for type empty or 'frame' - list of child objects
#                 target: how the selected child value should be stored:
#                     environment - set the environment to the child value
#                     define      - add -D<childValue> to the flags
#                     define:name - add -D<name>=<childValue> to the flags
#  values    - a list of value objects for a particular config
#              if the object is just a string it is converted to an object
#              with value being set to the string
#              parameters:
#                 key: unique key, defines the name(part) and the value store in cfg
#                      for the parent
#                      if not set, value is used
#                      null (empty) is a valid key
#                 value: the value (mandatory)
#                      if null the value will be set to undefined and ignored
#                 label: text to be shown
#                        if not set value will be used
#                 description,url
#                 resource: for parent-target environment:
#                           an object with allowed resource counts
#                           for other values: the resource to be counted
#
#
types:
  - &m5groovei2c
    type: frame
    key: m5groovei2c#grv#
    label: "M5 I2C Groove Units"
    target: resource
    resource: i2cbus
    children:
      - label: "M5 ENV3"
        type: checkbox
        key: m5env3#grv#
        target: define
        url: "https://docs.m5stack.com/en/unit/envIII"
        description: "M5 sensor module temperature, humidity, pressure"
        values:
          - value: M5_ENV3#grv#
            key: true
            resource: qmp69881#grv#1,sht3x#grv#1
      - label: "M5 ENV4"
        type: checkbox
        key: m5env4#grv#
        target: define
        url: "https://docs.m5stack.com/en/unit/ENV%E2%85%A3%20Unit"
        description: "M5 sensor module temperature, humidity, pressure"
        values:
          - value: M5_ENV4#grv#
            key: true
            resource: bmp280#grv#1,sht4x#grv#1
      - type: checkbox
        label: SHT3X-1
        description: "SHT30 temperature and humidity sensor 0x44"
        key: sht3xg1
        target: define
        url: "https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/SHT3x_Datasheet_digital.pdf"
        values: 
          - key: true
            value: GWSHT3XG1#grv#
            resource: sht3x#grv#1
      - type: checkbox
        label: SHT3X-2
        description: "SHT30 temperature and humidity sensor 0x45"
        key: sht3xg2
        target: define
        url: "https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/SHT3x_Datasheet_digital.pdf"
        values: 
          - key: true
            value: GWSHT3XG2#grv#
            resource: sht3x#grv#2
      - type: checkbox
        label: QMP6988-1
        description: "QMP6988 pressure sensor addr 86"
        key: qmp69881g1
        target: define
        url: "https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/enviii/QMP6988%20Datasheet.pdf"
        values: 
          - key: true
            value: GWQMP6988G1#grv#
            resource: qmp69881#grv#1
      - type: checkbox
        label: QMP6988-2
        description: "QMP6988 pressure sensor addr 112"
        key: qmp69882g2
        target: define
        url: "https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/enviii/QMP6988%20Datasheet.pdf"
        values: 
          - key: true
            value: GWQMP6988G2#grv#
            resource: qmp69881#grv#2
      - type: checkbox
        label: BME280-1
        description: "BME280 temperature/humidity/pressure sensor 0x76"
        key: bme2801g1
        target: define
        url: "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf"
        values: 
          - key: true
            value: GWBME280G1#grv#
            resource: bme280#grv#1
      - type: checkbox
        label: BME280-2
        description: "BME280 temperature/humidity/pressure sensor 0x77"
        key: bme2802
        target: define
        url: "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf"
        values: 
          - key: true
            value: GWBME280G2#grv#
            resource: bme280#grv#2
      - type: checkbox
        label: BMP280-1
        description: "BMP280 temperature/pressure sensor 0x76"
        key: bmp2801g1
        target: define
        url: "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf"
        values: 
          - key: true
            value: GWBMP280G1#grv#
            resource: bmp280#grv#1
      - type: checkbox
        label: BMP280-2
        description: "BMP280 temperature/pressure sensor 0x77"
        key: bmp2802
        target: define
        url: "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf"
        values: 
          - key: true
            value: GWBMP280G2#grv#
            resource: bmp280#grv#2
  

  - &m5groovecan
    type: select
    key: m5groovecan#grv#
    target: define
    label: "M5 Groove CAN Units"
    values:
      - label: "CAN Unit"
        url: "https://docs.m5stack.com/en/unit/can"
        description: "M5 Can unit"
        value: M5_CANUNIT#grv#
        resource: can    
  - &m5grooveserial
    type: select
    label: "M5 Groove Serial Unit"
    target: define
    key: m5grooveserial#grv#
    values:
      - label: "RS485"
        key: unit485
        value: SERIAL_GROOVE_485#grv#
        description: "M5 RS485 unit"
        url: "https://docs.m5stack.com/en/unit/rs485"
        resource: serial
      - label: "Tail485"
        value: SERIAL_GROOVE_485#grv#
        key: tail485
        description: "M5 Tail 485"
        url: "https://docs.m5stack.com/en/atom/tail485"
        resource: serial
      - label: "Gps Unit"
        value: M5_GPS_UNIT#grv#
        description: "M5 Gps Unit"
        url: "https://docs.m5stack.com/en/unit/gps"
        resource: serial
      - label: "Gps Unit v1.1"
        value: M5_GPSV11_UNIT#grv#
        description: "M5 Gps Unit v1.1"
        url: "https://docs.m5stack.com/en/unit/Unit-GPS%20v1.1"
        resource: serial
      - label: "RS232/RS422"
        value: SERIAL_GROOVE_232#grv#
        description: "Generic RS232/RS422 Unit (bidirectional)"
        resource: serial

  - &m5groove
    type: select
    key: m5groove#grv#
    label: 'M5 groove#grv# type '
    help: 'Select the functionality that should be available at the M5 groove pins'
    values:
      - key: 'CAN'
        children:
        - *m5groovecan 
      - key: 'I2C'
        children:
        - *m5groovei2c
      - key: 'Serial'
        children:
        - *m5grooveserial
  - &gpiopin
    type: dropdown
    resource: "gpio:"
    help: 'Select the number of the GPIO pin for this function'
    values: "#gpiopinv#"
      
  - &gpiopinv    
      - {label: unset,value:}
      - {label: "0: Low at boot!",value: 0}
      - 1
      - {label: "2: Float/Low at boot!", value: 2}
      - 3
      - {label: "4: Strapping!",value: 4}
      - {label: "5: Hight at boot!", value: 5}
      - {label: "12: Low at boot!", value: 12}
      - 13
      - 14
      - {label: "15: High at boot!", value: 15}
      - 16
      - 17
      - 18
      - 19
      - 21
      - 22
      - 23
      - 25
      - 26
      - 27
      - 32
      - 31
      - 32
      - 33
      - 37
      - 38

  - &gpiopinvs3
      - {label: unset,value:}
      - {label: "0: boot mode control",value: 0}
      - 1
      - 2
      - {label: "3: JTAG control", value: 3}
      - 4
      - 5
      - 6
      - 7
      - 8
      - 9
      - 10
      - 11
      - 12
      - 13
      - 14
      - 17
      - 18
      - 19
      - 20
      - 21
      - 33
      - 34
      - 35
      - 36
      - 37
      - 38
      - 39
      - 40
      - 41
      - 42
      - 43
      - 44
      - {label: "45: strapping pin", value: 45}
      - {label: "46: strapping pin", value: 46}
      - 47
      - 48


  - &gpioinput
    type: dropdown
    resource: "gpio:"
    help: 'Select the number of the GPIO pin for this function'
    values: "#gpiopinv#"
      
  - &gpioinputv    
      - {label: unset,value:}
      - {label: "0: Low at boot!",value: 0}
      - 1
      - {label: "2: Float/Low at boot!", value: 2}
      - 3
      - {label: "4: Strapping!",value: 4}
      - {label: "5: Hight at boot!", value: 5}
      - {label: "12: Low at boot!", value: 12}
      - 13
      - 14
      - {label: "15: High at boot!", value: 15}
      - 16
      - 17
      - 18
      - 19
      - 21
      - 22
      - 23
      - 25
      - 26
      - 27
      - 32
      - 31
      - 32
      - 33
      - 34
      - 35
      - 36
      - 37
      - 38
      - 39
  
  - &protogpio
      - {label: unset,value:}
      - {label: "PPIN19(left-2,gpio 19)", value: PPIN19}
      - {label: "PPIN21(right-1,gpio 21)", value: PPIN21}
      - {label: "PPIN22(left-1,gpio 22)", value: PPIN22}
      - {label: "PPIN23(left-3,gpio 23)", value: PPIN23}
      - {label: "PPIN25(right-2,gpio 25)", value: PPIN25}
      - {label: "PPIN33(left-4,gpio 33)", value: PPIN33}
  
  - &protogpios3
      - {label: unset,value:}
      - {label: "PPIN19(left-2,gpio 6)", value: PPIN19}
      - {label: "PPIN21(right-1,gpio 39)", value: PPIN21}
      - {label: "PPIN22(left-1,gpio 5)", value: PPIN22}
      - {label: "PPIN23(left-3,gpio 7)", value: PPIN23}
      - {label: "PPIN25(right-2,gpio 38)", value: PPIN25}
      - {label: "PPIN33(left-4,gpio 8)", value: PPIN33}  
  
  - &baudselect
    type: dropdown
    help: 'Select the baud rate'
    values: 
            - {label: unset,value:}
            - 1200
            - 2400
            - 4800
            - 9600
            - 14400
            - 19200
            - 28800
            - 38400
            - 57600
            - 115200
            - 230400
            - 460800
  
  - &serialRX
    <<: *gpioinput
    key: RX
    help: 'number of the GPIO pin for the receive function'
    target: "define:#serial#RX"
    mandatory: true
  - &serialTX
    <<: *gpiopin
    key: TX
    help: 'number of the GPIO pin for the transmit function'
    target: "define:#serial#TX"
    mandatory: true
  - &serialEnablePin
    <<: *gpiopin
    key: ENA
    label: "enable pin"
    help: "GPIO pin for output enable"
    target: "define:#serial#ENA"
    mandatory: false
  - &serialEnableLow
    type: checkbox
    key: ELOW
    label: "enable low"
    target: "define:#serial#ELO"
    default: false
    help: "set: low on enable pin for output, unset: high on enable pin for output"
    values:
    - key: true
      value: 1
    - key: false
      value: 0
  
  - &serialFixedBaud
    <<: *baudselect
    key: fixedBaud
    label: "fixed baud"
    help: "you can set a fixed baud rate here, this disables changing the baud rate in the UI"
    target: "define:#serial#BAUD"

  - &serialValues
      - key: true
        children:
        - type: select
          key: type
          target: "define:#serial#TYPE"
          label: "Serial Type"
          values:
            - key: uni
              value: 1
              label: "UNI"
              description: "Select direction at Config UI"
              help: 'On the config UI you can select if the serial should be a transmitter or a receiver'    
              children:
                - *serialRX
                - *serialTX
                - *serialEnablePin
                - *serialEnableLow
                - *serialFixedBaud
            - key: bi
              value: 2
              label: "BiDir" 
              description: "Input and Output"
              help: 'The serial device can run both receive and transmit. Typically for RS232.'   
              children:
                - *serialRX
                - *serialTX
                - *serialFixedBaud
            - key: rx
              value: 3
              label: "RX"    
              description: "Input only"
              children:
                - *serialRX
                - *serialEnablePin
                - *serialEnableLow
                - *serialFixedBaud
            - key: tx
              value: 1
              label: "TX"
              description: "output only"    
              children:
                - *serialTX
                - *serialEnablePin
                - *serialEnableLow
                - *serialFixedBaud
  - &serial1
    type: checkbox
    label: 'Serial 1'
    key: serial1
    resource: serial1
    base: 
      serial: GWSERIAL_
    values: *serialValues
      
  - &serial2
    type: checkbox
    label: 'Serial 2'
    key: serial2
    resource: serial2
    base:
      serial: GWSERIAL2_
    values: *serialValues

  - &can
    type: checkbox
    label: CAN(NMEA2000)
    key: can
    values:
      - key: true
        children:
          - <<: *gpioinput
            label: RX
            key: rx
            mandatory: true
            help: 'set the number of the GPIO pin for the CAN(NMEA2000) RX function'
            target: "define:ESP32_CAN_RX_PIN"
          - <<: *gpiopin
            label: TX
            key: tx
            mandatory: true
            help: 'set the number of the GPIO pin for the CAN(NMEA2000) TX function'
            target: "define:ESP32_CAN_TX_PIN"

  - &resetButton
    type: checkbox
    label: reset button
    key: resetButton
    values:
      - key: true
        children:
        - <<: *gpiopin
          label: Button
          key: button
          target: "define:GWBUTTON_PIN"
          help: 'the gpio pin for a reset to factory settings'
        - type: dropdown
          label: active mode
          help: 'select if the button should be active high or low'
          key: resetButtonMode
          target: "define:GWBUTTON_ACTIVE"
          values:
            - label: unset
              value:
            - label: LOW
              value: 0
            - label: HIGH
              value: 1
        - type: checkbox
          label: pullupdown
          description: "pull up/pull down resistor"
          key: resetButtonPUD
          values:
            - key: true
              target: define
              value: GWBUTTON_PULLUPDOWN

  - &led
    type: checkbox
    label: Led
    key: led
    description: 'RGB LED'
    values:
      - key: true
        children:
          - <<: *gpiopin
            label: LedPin
            key: ledpin
            mandatory: true
            target: "define:GWLED_PIN"
          - type: dropdown
            label: ledtype
            help: "the type of the led"
            key: ledtype
            target: "define:GWLED_CODE"
            mandatory: true
            values:
              - label: unset
                value:
              - label: SK6812
                value: 0
                key: sk6812
              - label: WS2812
                key: ws2812
                value: 1
          - type: dropdown
            key: ledorder
            label: color order
            target: "define:GWLED_SCHEMA"
            mandatory: true
            values:
              - label: unset
                value: 
              - label: RGB
                value: 10  
              - label: RBG
                value: 17
              - label: GRB
                value: 66
              - label: GBR
                value: 80
              - label: BRG
                value: 129
              - label: BGR
                value: 136
          - type: range
            label: brigthness
            target: "define:GWLED_BRIGHTNESS"
            key: brightness
            min: 0
            max: 255
            

  - &iicsensors
    type: checkbox
    label: "I2C #busname#"
    key: "i2c#busname#"
    resource: "i2c#busname#"
    description: "I2C Bus #busname#"
    values:
      - key: true
        children:
          - <<: *gpiopin
            label: SDA
            key: sda
            mandatory: true
            target: "define:GWIIC_SDA#bus#"
          - <<: *gpiopin
            label: SCL
            key: scl
            mandatory: true
            target: "define:GWIIC_SCL#bus#"
          - type: checkbox
            label: SHT3X-#busname#-1
            description: "SHT30 temperature and humidity sensor 0x44"
            key: sht3x1
            target: define
            url: "https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/SHT3x_Datasheet_digital.pdf"
            values: 
              - key: true
                value: GWSHT3X#busname#1
          - type: checkbox
            label: SHT3X-#busname#-1
            description: "SHT30 temperature and humidity sensor 0x45"
            key: sht3x2
            target: define
            url: "https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/SHT3x_Datasheet_digital.pdf"
            values: 
              - key: true
                value: GWSHT3X#busname#2
          - type: checkbox
            label: QMP6988-#busname#-1
            description: "QMP6988 pressure sensor addr 86"
            key: qmp69881
            target: define
            url: "https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/enviii/QMP6988%20Datasheet.pdf"
            values: 
              - key: true
                value: GWQMP6988#busname#1
          - type: checkbox
            label: QMP6988-#busname#-2
            description: "QMP6988 pressure sensor addr 112"
            key: qmp69882
            target: define
            url: "https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/enviii/QMP6988%20Datasheet.pdf"
            values: 
              - key: true
                value: GWQMP6988#busname#2
          - type: checkbox
            label: BME280-#busname#-1
            description: "BME280 temperature/humidity/pressure sensor 0x76"
            key: bme2801
            target: define
            url: "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf"
            values: 
              - key: true
                value: GWBME280#busname#1
          - type: checkbox
            label: BME280-#busname#-2
            description: "BME280 temperature/humidity/pressure sensor 0x77"
            key: bme2802
            target: define
            url: "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf"
            values: 
              - key: true
                value: GWBME280#busname#2
          - type: checkbox
            label: BMP280-#busname#-1
            description: "BMP280 temperature/pressure sensor 0x76"
            key: bmp2801
            target: define
            url: "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf"
            values: 
              - key: true
                value: GWBMP280#busname#1
          - type: checkbox
            label: BMP280-#busname#-2
            description: "BMP280 temperature/pressure sensor 0x77"
            key: bmp2802
            target: define
            url: "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf"
            values: 
              - key: true
                value: GWBMP280#busname#2
  
  - &spisensors
    type: checkbox
    label: "SPI/SSI #busname#"
    key: "spi#busname#"
    resource: "spi#busname#"
    description: "SPI(SSI) Bus #busname#"
    values:
      - key: true
        children:
          - <<: *gpiopin
            label: CLK
            key: clk
            mandatory: true
            target: "define:GWSPI#bus#_CLK"
          - <<: *gpiopin
            label: MISO
            key: miso
            mandatory: false
            target: "define:GWSPI#bus#_MISO"
          - <<: *gpiopin
            label: MOSI
            key: mosi
            mandatory: false
            target: "define:GWSPI#bus#_MOSI"
            description: "GPIO pin for MOSI, not necessary for SSI"
          - type: checkbox
            label: GWDMS22B-#busname#-1
            description: "DMS22B rotatory encoder (SSI)"
            key: dms22b#busname#1
            target: define
            url: "https://www.mouser.de/datasheet/2/54/bour_s_a0011704065_1-2262614.pdf"
            values: 
              - key: true
                value: GWDMS22B#busname#1
                children:
                  - <<: *gpiopin
                    label: CS
                    key: dms22b#busname#1cs
                    description: "chip select pin, only necessary for multiple devices on this bus"
                    target: "define:GWDMS22B#busname#1_CS"
          - type: checkbox
            label: GWDMS22B-#busname#-2
            description: "DMS22B rotatory encoder (SSI)"
            key: dms22b#busname#2
            target: define
            url: "https://www.mouser.de/datasheet/2/54/bour_s_a0011704065_1-2262614.pdf"
            values: 
              - key: true
                value: GWDMS22B#busname#2
                children:
                  - <<: *gpiopin
                    label: CS
                    key: dms22b#busname#2cs
                    description: "chip select pin, only necessary for multiple devices on this bus"
                    target: "define:GWDMS22B#busname#2_CS"
  
  - &m5protochildren
      - *serial1
      - *serial2
      - *can
      - <<: *iicsensors
        base: 
          busname: "1"
          bus: ""
      - <<: *iicsensors
        base: 
          busname: "2"
          bus: "2"
      - <<: *spisensors
        base:
          busname: "1"
          bus: "1"
      - <<: *spisensors
        base:
          busname: "2"
          bus: "2"        
  - &m5pabcchildren
    - <<: *m5groove
      base:
        grv: _A
    - <<: *m5groove
      base:
        grv: _B
    - <<: *m5groove
      base:
        grv: _C
    
    
                
  - &m5base
      type: select
      target: define
      label: 'M5 Atom light Base'
      key: m5lightbase
      values:
        - label: "CAN KIT"
          value: M5_CAN_KIT
          description: "M5 Stack CAN Kit"
          url: "https://docs.m5stack.com/en/atom/atom_can"
          resource: can
        - value: M5_SERIAL_KIT_232
          description: "M5 Stack RS232 Base"
          label: "Atomic RS232 Base"
          url: "https://docs.m5stack.com/en/atom/Atomic%20RS232%20Base"
          resource: serial
        - value: M5_SERIAL_KIT_485
          description: "M5 Stack RS485 Base"
          label: "Atomic RS485 Base"
          url: "https://docs.m5stack.com/en/atom/Atomic%20RS485%20Base"
          resource: serial
        - value: M5_GPS_KIT
          description: "M5 Stack Gps Kit"
          label: "Gps Base"
          url: "https://docs.m5stack.com/en/atom/atomicgps"
          resource: serial
        - value: M5_GPSV2_KIT
          description: "M5 Stack Gps Base v2.0"
          label: "Gps Base"
          url: "https://docs.m5stack.com/en/atom/Atomic_GPS_Base_v2.0"
          resource: serial
        - value: M5_PROTO_HUB
          description: "M5 Stack HUB PROTO"
          url: "https://docs.m5stack.com/en/atom/atomhub"
          label: "Hub Proto"
          base:
            gpioinputv: "#protogpio#"
            gpiopinv: "#protogpio#"
          children:
            *m5protochildren
        - value: M5_PORTABC
          description: "M5 Stack Port ABC extension base"
          url: "https://docs.m5stack.com/en/unit/AtomPortABC"
          label: "ABC Ext"
          children:
            *m5pabcchildren

resources:
  default: &esp32default
    serial: 2
    can: 1
    i2cbus: 2
    gpio: 1 

config:
  children:
    - type: string
      label: 'Build Name'
      key: buildname
      target: "define:GWBUILD_NAME"
      help: "Set a name to identify your build. Will also become the name for the generated files and the firmware type in the image. Max 31 characters."
      max: 31
      allowed: "0-9A-Za-z_-"
    - type: select
      target: environment
      label: 'Board'
      key: board
      base:
        gpiopinv: *gpiopinv
        gpioinputv: *gpioinputv
        grv: ""
        protogpio: *protogpio
      values: 
        - value: m5stack-atom-generic
          label: m5stack-atom
          description: "M5 Stack Atom light"
          url: "http://docs.m5stack.com/en/core/atom_lite"
          resource: *esp32default
          children:
            - *m5base
            - *m5groove
        - value: m5stack-atoms3-generic
          label: m5stack-atoms3
          description: "M5 Stack AtomS3 light"
          url: "http://docs.m5stack.com/en/core/AtomS3%20Lite"
          resource: *esp32default
          base:
            protogpio: *protogpios3
          children:
            - *m5base    
            - *m5groove
        - value: m5stickc-atom-generic
          label: m5stick+ atom
          description: "M5 Stick C+"
          url: "http://docs.m5stack.com/en/core/m5stickc_plus"
          resource: *esp32default
          children:
            - *m5groove


        - value: nodemcu-generic
          label: nodemcu
          description: "Node mcu esp32,4MB flash, no PSRAM"
          url: "https://docs.platformio.org/en/stable/boards/espressif32/nodemcu-32s.html"
          resource: *esp32default
          children:
            - *serial1
            - *serial2
            - *can
            - *resetButton
            - *led
            - <<: *iicsensors
              base: 
                busname: "1"
                bus: ""
            - <<: *iicsensors
              base: 
                busname: "2"
                bus: "2"
            - <<: *spisensors
              base:
                busname: "1"
                bus: "1"
            - <<: *spisensors
              base:
                busname: "2"
                bus: "2"

        - value: s3devkitm-generic
          label: s3devkitm
          description: "esp32 s3 generic, 8MB flash, no PSRAM "
          url: "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitm-1.html"
          resource: *esp32default
          base:
            gpiopinv: *gpiopinvs3
            gpioinputv: *gpiopinvs3
            protogpio: *protogpios3
          children:
            - *serial1
            - *serial2
            - *can
            - *resetButton
            - *led
            - <<: *iicsensors
              base:
                busname: "1"
                bus: ""
            - <<: *iicsensors
              base:
                busname: "2"
                bus: "2"
            - <<: *spisensors
              base:
                busname: "1"
                bus: "1"
            - <<: *spisensors
              base:
                busname: "2"
                bus: "2"