thooge/esp32-nmea2000-obp60
1
0
Fork 0
mirror of https://github.com/thooge/esp32-nmea2000-obp60.git synced 2026-02-24 20:53:07 +01:00
Code Releases Activity

Add feature to optionally apply patches to gateway code

Browse Source
This commit is contained in:
Thomas Hooge
2026-02-15 13:13:19 +01:00
parent 4b6e2abe33
commit 0363ba4379
2 changed files with 30 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
lib/obp60task/platformio.ini
View File

@@ -58,6 +58,7 @@ build_flags=
# -D DISPLAY_GYE042A87 #alternativ E-Ink display from Genyo Optical, R10 2.2 ohm - medium
# -D DISPLAY_SE0420NQ04 #alternativ E-Ink display from SID Technology, R10 2.2 ohm - bad (burn in effects)
# -D DISPLAY_ZJY400300-042CAAMFGN #alternativ E-Ink display from ZZE Technology, R10 2.2 ohm - very good
# -D ENABLE_PATCHES #enable patching of gateway code
${env.build_flags}
#CONFIG_ESP_TASK_WDT_TIMEOUT_S = 10 #Task Watchdog timeout period (seconds) [1...60] 5 default
upload_port = /dev/ttyACM0 #OBP60 download via USB-C direct
@@ -108,6 +109,7 @@ build_flags=
#-D DISPLAY_ZJY400300-042CAAMFGN #alternativ E-Ink display from ZZE Technology, R10 2.2 ohm - very good
-D LIPO_ACCU_1200 #Hardware extension, LiPo accu 3,7V 1200mAh
-D VOLTAGE_SENSOR #Hardware extension, LiPo voltage sensor with two resistors
#-D ENABLE_PATCHES #enable patching of gateway code
${env.build_flags}
upload_port = /dev/ttyUSB0 #OBP40 download via external USB/Serail converter
upload_protocol = esptool #firmware upload via USB OTG seriell, by first upload need to set the ESP32-S3 in the upload mode with shortcut GND to Pin27