thooge
/
esp32-nmea2000-obp60
mirror of https://github.com/thooge/esp32-nmea2000-obp60.git
1
0
Fork 0
Code Releases Activity

Merge branch 'PageWindPlot' of https://github.com/Scorgan01/esp32-nmea2000-obp60 into PageWindPlot

This commit is contained in:
Ulrich Meine 2025-08-17 23:50:24 +02:00
parent 371816f946 c8a7f14773
commit 07200ad701
24 changed files with 859 additions and 622 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

92
lib/obp60task/OBP60Extensions.cpp
View File

@ -64,6 +64,12 @@ PCF8574 pcf8574_Out(PCF8574_I2C_ADDR1); // First digital output modul PCF8574 fr
Adafruit_FRAM_I2C fram;
bool hasFRAM = false;
// SD Card
#ifdef BOARD_OBP40S3
sdmmc_card_t *sdcard;
#endif
bool hasSDCard = false;
// Global vars
bool blinkingLED = false; // Enable / disable blinking flash LED
bool statusLED = false; // Actual status of flash LED on/off
@ -78,6 +84,9 @@ LedTaskData *ledTaskData=nullptr;
void hardwareInit(GwApi *api)
{
GwLog *logger = api->getLogger();
GwConfigHandler *config = api->getConfig();
Wire.begin();
// Init PCF8574 digital outputs
Wire.setClock(I2C_SPEED); // Set I2C clock on 10 kHz
@ -87,7 +96,7 @@ void hardwareInit(GwApi *api)
fram = Adafruit_FRAM_I2C();
if (esp_reset_reason() == ESP_RST_POWERON) {
// help initialize FRAM
api->getLogger()->logDebug(GwLog::LOG,"Delaying I2C init for 250ms due to cold boot");
logger->logDebug(GwLog::LOG, "Delaying I2C init for 250ms due to cold boot");
delay(250);
}
// FRAM (e.g. MB85RC256V)
@ -99,11 +108,88 @@ void hardwareInit(GwApi *api)
// Boot counter
uint8_t framcounter = fram.read(0x0000);
fram.write(0x0000, framcounter+1);
api->getLogger()->logDebug(GwLog::LOG,"FRAM detected: 0x%04x/0x%04x (counter=%d)", manufacturerID, productID, framcounter);
logger->logDebug(GwLog::LOG, "FRAM detected: 0x%04x/0x%04x (counter=%d)", manufacturerID, productID, framcounter);
}
else {
hasFRAM = false;
api->getLogger()->logDebug(GwLog::LOG,"NO FRAM detected");
logger->logDebug(GwLog::LOG, "NO FRAM detected");
}
// SD Card
hasSDCard = false;
#ifdef BOARD_OBP40S3
if (config->getBool(config->useSDCard)) {
esp_err_t ret;
sdmmc_host_t host = SDSPI_HOST_DEFAULT();
host.slot = SPI3_HOST;
logger->logDebug(GwLog::DEBUG, "SDSPI_HOST: max_freq_khz=%d" , host.max_freq_khz);
spi_bus_config_t bus_cfg = {
.mosi_io_num = SD_SPI_MOSI,
.miso_io_num = SD_SPI_MISO,
.sclk_io_num = SD_SPI_CLK,
.quadwp_io_num = -1,
.quadhd_io_num = -1,
.max_transfer_sz = 4000,
};
ret = spi_bus_initialize((spi_host_device_t) host.slot, &bus_cfg, SDSPI_DEFAULT_DMA);
if (ret != ESP_OK) {
logger->logDebug(GwLog::ERROR, "Failed to initialize SPI bus for SD card");
} else {
sdspi_device_config_t slot_config = SDSPI_DEVICE_CONFIG_DEFAULT();
slot_config.gpio_cs = SD_SPI_CS;
slot_config.host_id = (spi_host_device_t) host.slot;
esp_vfs_fat_sdmmc_mount_config_t mount_config = {
.format_if_mount_failed = false,
.max_files = 5,
.allocation_unit_size = 16 * 1024
};
ret = esp_vfs_fat_sdspi_mount(MOUNT_POINT, &host, &slot_config, &mount_config, &sdcard);
if (ret != ESP_OK) {
if (ret == ESP_FAIL) {
logger->logDebug(GwLog::ERROR, "Failed to mount SD card filesystem");
} else {
// ret == 263 could be not powered up yet
logger->logDebug(GwLog::ERROR, "Failed to initialize SD card (error #%d)", ret);
}
} else {
logger->logDebug(GwLog::LOG, "SD card filesystem mounted at '%s'", MOUNT_POINT);
hasSDCard = true;
}
}
if (hasSDCard) {
// read some stats
String features = "";
if (sdcard->is_mem) features += "MEM "; // Memory card
if (sdcard->is_sdio) features += "IO "; // IO Card
if (sdcard->is_mmc) features += "MMC "; // MMC Card
if (sdcard->is_ddr) features += "DDR ";
// if (sdcard->is_uhs1) features += "UHS-1 ";
// ext_csd. Extended information
// uint8_t rev, uint8_t power_class
logger->logDebug(GwLog::LOG, "SD card features: %s", features);
logger->logDebug(GwLog::LOG, "SD card size: %lluMB", ((uint64_t) sdcard->csd.capacity) * sdcard->csd.sector_size / (1024 * 1024));
}
}
#endif
}
void powerInit(String powermode) {
// Max Power | Only 5.0V | Min Power
if (powermode == "Max Power" || powermode == "Only 5.0V") {
#ifdef HARDWARE_V21
setPortPin(OBP_POWER_50, true); // Power on 5.0V rail
#endif
#ifdef BOARD_OBP40S3
setPortPin(OBP_POWER_EPD, true);// Power on ePaper display
setPortPin(OBP_POWER_SD, true); // Power on SD card
#endif
} else { // Min Power
#ifdef HARDWARE_V21
setPortPin(OBP_POWER_50, false); // Power off 5.0V rail
#endif
#ifdef BOARD_OBP40S3
setPortPin(OBP_POWER_EPD, false);// Power off ePaper display
setPortPin(OBP_POWER_SD, false); // Power off SD card
#endif
}
}

12
lib/obp60task/OBP60Extensions.h
View File

@ -7,6 +7,12 @@
#include <GxEPD2_BW.h> // E-paper lib V2
#include <Adafruit_FRAM_I2C.h> // I2C FRAM
#ifdef BOARD_OBP40S3
#include "esp_vfs_fat.h"
#include "sdmmc_cmd.h"
#define MOUNT_POINT "/sdcard"
#endif
// FRAM address reservations 32kB: 0x0000 - 0x7FFF
// 0x0000 - 0x03ff: single variables
#define FRAM_PAGE_NO 0x0002
@ -15,6 +21,7 @@
#define FRAM_VOLTAGE_AVG 0x000A
#define FRAM_VOLTAGE_TREND 0x000B
#define FRAM_VOLTAGE_MODE 0x000C
// Wind page
#define FRAM_WIND_SIZE 0x000D
#define FRAM_WIND_SRC 0x000E
#define FRAM_WIND_MODE 0x000F
@ -24,6 +31,10 @@
extern Adafruit_FRAM_I2C fram;
extern bool hasFRAM;
extern bool hasSDCard;
#ifdef BOARD_OBP40S3
extern sdmmc_card_t *sdcard;
#endif
// Fonts declarations for display (#includes see OBP60Extensions.cpp)
extern const GFXfont DSEG7Classic_BoldItalic16pt7b;
@ -75,6 +86,7 @@ void deepSleep(CommonData &common);
uint8_t getLastPage();
void hardwareInit(GwApi *api);
void powerInit(String powermode);
void setPortPin(uint pin, bool value); // Set port pin for extension port

225
lib/obp60task/OBP60Formater.cpp → lib/obp60task/OBP60Formatter.cpp
View File

@ -49,9 +49,9 @@ String formatLongitude(double lon) {
return String(degree, 0) + "\x90 " + String(minute, 4) + "' " + ((lon > 0) ? "E" : "W");
}
FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
FormattedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
GwLog *logger = commondata.logger;
FormatedData result;
FormattedData result;
static int dayoffset = 0;
double rawvalue = 0;
@ -65,6 +65,7 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
String tempFormat = commondata.config->getString(commondata.config->tempFormat); // [K|°C|°F]
String dateFormat = commondata.config->getString(commondata.config->dateFormat); // [DE|GB|US]
bool usesimudata = commondata.config->getBool(commondata.config->useSimuData); // [on|off]
String precision = commondata.config->getString(commondata.config->valueprecision); // [1|2]
// If boat value not valid
if (! value->valid && !usesimudata){
@ -72,6 +73,19 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
return result;
}
const char* fmt_dec_1;
const char* fmt_dec_10;
const char* fmt_dec_100;
if (precision == "1") {
fmt_dec_1 = "%3.1f";
fmt_dec_10 = "%3.0f";
fmt_dec_100 = "%3.0f";
} else {
fmt_dec_1 = "%3.2f";
fmt_dec_10 = "%3.1f";
fmt_dec_100 = "%3.0f";
}
// LOG_DEBUG(GwLog::DEBUG,"formatValue init: getFormat: %s date->value: %f time->value: %f", value->getFormat(), commondata.date->value, commondata.time->value);
static const int bsize = 30;
char buffer[bsize+1];
@ -206,13 +220,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
result.unit = "m/s";
}
if(speed < 10) {
snprintf(buffer,bsize,"%3.2f",speed);
snprintf(buffer, bsize, fmt_dec_1, speed);
}
if(speed >= 10 && speed < 100){
snprintf(buffer,bsize,"%3.1f",speed);
else if (speed < 100) {
snprintf(buffer, bsize, fmt_dec_10, speed);
}
if(speed >= 100){
snprintf(buffer,bsize,"%3.0f",speed);
else {
snprintf(buffer, bsize, fmt_dec_100, speed);
}
}
//########################################################
@ -238,40 +252,40 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
if (speed < 0.3) {
speed = 0;
}
if(speed >=0.3 && speed < 1.5){
else if (speed < 1.5) {
speed = 1;
}
if(speed >=1.5 && speed < 3.3){
else if (speed < 3.3) {
speed = 2;
}
if(speed >=3.3 && speed < 5.4){
else if (speed < 5.4) {
speed = 3;
}
if(speed >=5.4 && speed < 7.9){
else if (speed < 7.9) {
speed = 4;
}
if(speed >=7.9 && speed < 10.7){
else if (speed < 10.7) {
speed = 5;
}
if(speed >=10.7 && speed < 13.8){
else if (speed < 13.8) {
speed = 6;
}
if(speed >=13.8 && speed < 17.1){
else if (speed < 17.1) {
speed = 7;
}
if(speed >=17.1 && speed < 20.7){
else if (speed < 20.7) {
speed = 8;
}
if(speed >=20.7 && speed < 24.4){
else if (speed < 24.4) {
speed = 9;
}
if(speed >=24.4 && speed < 28.4){
else if (speed < 28.4) {
speed = 10;
}
if(speed >=28.4 && speed < 32.6){
else if (speed < 32.6) {
speed = 11;
}
if(speed >=32.6){
else {
speed = 12;
}
result.unit = "bft";
@ -285,13 +299,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
}
else{
if (speed < 10){
snprintf(buffer,bsize,"%3.2f",speed);
snprintf(buffer, bsize, fmt_dec_1, speed);
}
if(speed >= 10 && speed < 100){
snprintf(buffer,bsize,"%3.1f",speed);
else if (speed < 100){
snprintf(buffer, bsize, fmt_dec_10, speed);
}
if(speed >= 100){
snprintf(buffer,bsize,"%3.0f",speed);
else {
snprintf(buffer, bsize, fmt_dec_100, speed);
}
}
}
@ -337,10 +351,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
dop = 99.9;
}
if (dop < 10){
snprintf(buffer,bsize,"%3.2f",dop);
snprintf(buffer, bsize, fmt_dec_1, dop);
}
if(dop >= 10 && dop < 100){
snprintf(buffer,bsize,"%3.1f",dop);
else if(dop < 100){
snprintf(buffer, bsize, fmt_dec_10, dop);
}
else {
snprintf(buffer, bsize, fmt_dec_100, dop);
}
}
//########################################################
@ -410,13 +427,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
result.unit = "m";
}
if (depth < 10) {
snprintf(buffer,bsize,"%3.2f",depth);
snprintf(buffer, bsize, fmt_dec_1, depth);
}
if(depth >= 10 && depth < 100){
snprintf(buffer,bsize,"%3.1f",depth);
else if (depth < 100){
snprintf(buffer, bsize, fmt_dec_10, depth);
}
if(depth >= 100){
snprintf(buffer,bsize,"%3.0f",depth);
else {
snprintf(buffer, bsize, fmt_dec_100, depth);
}
}
//########################################################
@ -430,11 +447,11 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
xte = rawvalue;
}
if (xte >= 100) {
snprintf(buffer,bsize,"%3.0f",value->value);
snprintf(buffer, bsize, fmt_dec_100, value->value);
} else if (xte >= 10) {
snprintf(buffer,bsize,"%3.1f",value->value);
snprintf(buffer, bsize, fmt_dec_10, value->value);
} else {
snprintf(buffer,bsize,"%3.2f",value->value);
snprintf(buffer, bsize, fmt_dec_1, value->value);
}
result.unit = "nm";
}
@ -461,13 +478,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
result.unit = "K";
}
if(temp < 10) {
snprintf(buffer,bsize,"%3.2f",temp);
snprintf(buffer, bsize, fmt_dec_1, temp);
}
if(temp >= 10 && temp < 100){
snprintf(buffer,bsize,"%3.1f",temp);
else if (temp < 100) {
snprintf(buffer, bsize, fmt_dec_10, temp);
}
if(temp >= 100){
snprintf(buffer,bsize,"%3.0f",temp);
else {
snprintf(buffer, bsize, fmt_dec_100, temp);
}
}
//########################################################
@ -489,17 +506,17 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
distance = distance * 0.000539957;
result.unit = "nm";
}
else{;
else {
result.unit = "m";
}
if (distance < 10){
snprintf(buffer,bsize,"%3.2f",distance);
snprintf(buffer, bsize, fmt_dec_1, distance);
}
if(distance >= 10 && distance < 100){
snprintf(buffer,bsize,"%3.1f",distance);
else if (distance < 100){
snprintf(buffer, bsize, fmt_dec_10, distance);
}
if(distance >= 100){
snprintf(buffer,bsize,"%3.0f",distance);
else {
snprintf(buffer, bsize, fmt_dec_100, distance);
}
}
//########################################################
@ -547,10 +564,10 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
voltage = rawvalue;
}
if (voltage < 10) {
snprintf(buffer,bsize,"%3.2f",voltage);
snprintf(buffer, bsize, fmt_dec_1, voltage);
}
else {
snprintf(buffer,bsize,"%3.1f",voltage);
snprintf(buffer, bsize, fmt_dec_10, voltage);
}
result.unit = "V";
}
@ -566,13 +583,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
current = rawvalue;
}
if (current < 10) {
snprintf(buffer,bsize,"%3.2f",current);
snprintf(buffer, bsize, fmt_dec_1, current);
}
if(current >= 10 && current < 100){
snprintf(buffer,bsize,"%3.1f",current);
else if(current < 100) {
snprintf(buffer, bsize, fmt_dec_10, current);
}
if(current >= 100){
snprintf(buffer,bsize,"%3.0f",current);
else {
snprintf(buffer, bsize, fmt_dec_100, current);
}
result.unit = "A";
}
@ -588,13 +605,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
temperature = rawvalue;
}
if (temperature < 10) {
snprintf(buffer,bsize,"%3.2f",temperature);
snprintf(buffer, bsize, fmt_dec_1, temperature);
}
if(temperature >= 10 && temperature < 100){
snprintf(buffer,bsize,"%3.1f",temperature);
else if (temperature < 100) {
snprintf(buffer, bsize, fmt_dec_10, temperature);
}
if(temperature >= 100){
snprintf(buffer,bsize,"%3.0f",temperature);
else {
snprintf(buffer, bsize, fmt_dec_100, temperature);
}
result.unit = "Deg C";
}
@ -610,13 +627,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
temperature = rawvalue;
}
if (temperature < 10) {
snprintf(buffer,bsize,"%3.2f",temperature);
snprintf(buffer, bsize, fmt_dec_1, temperature);
}
if(temperature >= 10 && temperature < 100){
snprintf(buffer,bsize,"%3.1f",temperature);
else if(temperature < 100) {
snprintf(buffer, bsize, fmt_dec_10, temperature);
}
if(temperature >= 100){
snprintf(buffer,bsize,"%3.0f",temperature);
else {
snprintf(buffer, bsize, fmt_dec_100, temperature);
}
result.unit = "Deg C";
}
@ -632,13 +649,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
humidity = rawvalue;
}
if (humidity < 10) {
snprintf(buffer,bsize,"%3.2f",humidity);
snprintf(buffer, bsize, fmt_dec_1, humidity);
}
if(humidity >= 10 && humidity < 100){
snprintf(buffer,bsize,"%3.1f",humidity);
else if(humidity < 100) {
snprintf(buffer, bsize, fmt_dec_10, humidity);
}
if(humidity >= 100){
snprintf(buffer,bsize,"%3.0f",humidity);
else {
snprintf(buffer, bsize, fmt_dec_100, humidity);
}
result.unit = "%";
}
@ -654,13 +671,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
volume = rawvalue;
}
if (volume < 10) {
snprintf(buffer,bsize,"%3.2f",volume);
snprintf(buffer, bsize, fmt_dec_1, volume);
}
if(volume >= 10 && volume < 100){
snprintf(buffer,bsize,"%3.1f",volume);
else if (volume < 100) {
snprintf(buffer, bsize, fmt_dec_10, volume);
}
if(volume >= 100){
snprintf(buffer,bsize,"%3.0f",volume);
else if (volume >= 100) {
snprintf(buffer, bsize, fmt_dec_100, volume);
}
result.unit = "%";
}
@ -676,13 +693,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
volume = rawvalue;
}
if (volume < 10) {
snprintf(buffer,bsize,"%3.2f",volume);
snprintf(buffer, bsize, fmt_dec_1, volume);
}
if(volume >= 10 && volume < 100){
snprintf(buffer,bsize,"%3.1f",volume);
else if (volume < 100) {
snprintf(buffer, bsize, fmt_dec_10, volume);
}
if(volume >= 100){
snprintf(buffer,bsize,"%3.0f",volume);
else {
snprintf(buffer, bsize, fmt_dec_100, volume);
}
result.unit = "l";
}
@ -698,13 +715,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
flow = rawvalue;
}
if (flow < 10) {
snprintf(buffer,bsize,"%3.2f",flow);
snprintf(buffer, bsize, fmt_dec_1, flow);
}
if(flow >= 10 && flow < 100){
snprintf(buffer,bsize,"%3.1f",flow);
else if (flow < 100) {
snprintf(buffer, bsize, fmt_dec_10, flow);
}
if(flow >= 100){
snprintf(buffer,bsize,"%3.0f",flow);
else {
snprintf(buffer, bsize, fmt_dec_100, flow);
}
result.unit = "l/min";
}
@ -712,7 +729,7 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
else if (value->getFormat() == "formatXdr:G:"){
double generic = 0;
if (usesimudata == false) {
generic = value->value; // Value in l/min
generic = value->value;
rawvalue = value->value;
}
else {
@ -720,13 +737,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
generic = rawvalue;
}
if (generic < 10) {
snprintf(buffer,bsize,"%3.2f",generic);
snprintf(buffer, bsize, fmt_dec_1, generic);
}
if(generic >= 10 && generic < 100){
snprintf(buffer,bsize,"%3.1f",generic);
else if (generic < 100) {
snprintf(buffer, bsize, fmt_dec_10, generic);
}
if(generic >= 100){
snprintf(buffer,bsize,"%3.0f",generic);
else {
snprintf(buffer, bsize, fmt_dec_100, generic);
}
result.unit = "";
}
@ -742,13 +759,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
dplace = rawvalue;
}
if (dplace < 10) {
snprintf(buffer,bsize,"%3.2f",dplace);
snprintf(buffer, bsize, fmt_dec_1, dplace);
}
if(dplace >= 10 && dplace < 100){
snprintf(buffer,bsize,"%3.1f",dplace);
else if (dplace < 100) {
snprintf(buffer, bsize, fmt_dec_10, dplace);
}
if(dplace >= 100){
snprintf(buffer,bsize,"%3.0f",dplace);
else {
snprintf(buffer, bsize, fmt_dec_100, dplace);
}
result.unit = "%";
}
@ -784,13 +801,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
rpm = rawvalue;
}
if (rpm < 10) {
snprintf(buffer,bsize,"%3.2f",rpm);
snprintf(buffer, bsize, fmt_dec_1, rpm);
}
if(rpm >= 10 && rpm < 100){
snprintf(buffer,bsize,"%3.1f",rpm);
else if (rpm < 100) {
snprintf(buffer, bsize, fmt_dec_10, rpm);
}
if(rpm >= 100){
snprintf(buffer,bsize,"%3.0f",rpm);
else {
snprintf(buffer, bsize, fmt_dec_100, rpm);
}
result.unit = "rpm";
}
@ -799,13 +816,13 @@ FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
//########################################################
else {
if (value->value < 10) {
snprintf(buffer,bsize,"%3.2f",value->value);
snprintf(buffer, bsize, fmt_dec_1, value->value);
}
if(value->value >= 10 && value->value < 100){
snprintf(buffer,bsize,"%3.1f",value->value);
else if (value->value < 100) {
snprintf(buffer, bsize, fmt_dec_10, value->value);
}
if(value->value >= 100){
snprintf(buffer,bsize,"%3.0f",value->value);
else {
snprintf(buffer, bsize, fmt_dec_100, value->value);
}
result.unit = "";
}

10
lib/obp60task/OBP60Hardware.h
View File

@ -82,7 +82,7 @@
// Direction pin for RS485 NMEA0183
#define OBP_DIRECTION_PIN 8
// I2C
#define I2C_SPEED 10000UL // 10kHz clock speed on I2C bus
#define I2C_SPEED 100000UL // 100kHz clock speed on I2C bus
#define OBP_I2C_SDA 21
#define OBP_I2C_SCL 38
// DS1388 RTC
@ -120,10 +120,10 @@
#define SHOW_TIME 6000 // Show time in [ms] for logo and WiFi QR code
#define FULL_REFRESH_TIME 600 // Refresh cycle time in [s][600...3600] for full display update (very important healcy function)
// SPI SD-Card
#define SD_SPI_CS 10
#define SD_SPI_MOSI 40
#define SD_SPI_CLK 39
#define SD_SPI_MISO 13
#define SD_SPI_CS GPIO_NUM_10
#define SD_SPI_MOSI GPIO_NUM_40
#define SD_SPI_CLK GPIO_NUM_39
#define SD_SPI_MISO GPIO_NUM_13
// GPS (NEO-6M, NEO-M8N, ATGM336H)
#define OBP_GPS_RX 19

2
lib/obp60task/PageClock.cpp
View File

@ -120,7 +120,7 @@ bool homevalid = false; // homelat and homelon are valid
}
else{
value1 = simtime++; // Simulation data for time value 11:36 in seconds
} // Other simulation data see OBP60Formater.cpp
} // Other simulation data see OBP60Formatter.cpp
bool valid1 = bvalue1->valid; // Valid information
String svalue1 = formatValue(bvalue1, *commonData).svalue; // Formatted value as string including unit conversion and switching decimal places
String unit1 = formatValue(bvalue1, *commonData).unit; // Unit of value

2
lib/obp60task/PageCompass.cpp
View File

@ -83,7 +83,7 @@ class PageCompass : public Page
String DataText[HowManyValues];
String DataUnits[HowManyValues];
String DataFormat[HowManyValues];
FormatedData TheFormattedData;
FormattedData TheFormattedData;
for (int i = 0; i < HowManyValues; i++){
bvalue = pageData.values[i];

6
lib/obp60task/PageFourValues.cpp
View File

@ -53,7 +53,7 @@ class PageFourValues : public Page
String unit1 = formatValue(bvalue1, *commonData).unit; // Unit of value
// Get boat values #2
GwApi::BoatValue *bvalue2 = pageData.values[1]; // Second element in list (only one value by PageOneValue)
GwApi::BoatValue *bvalue2 = pageData.values[1]; // Second element in list
String name2 = xdrDelete(bvalue2->getName()); // Value name
name2 = name2.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue2, logger); // Check if boat data value is to be calibrated
@ -63,7 +63,7 @@ class PageFourValues : public Page
String unit2 = formatValue(bvalue2, *commonData).unit; // Unit of value
// Get boat values #3
GwApi::BoatValue *bvalue3 = pageData.values[2]; // Second element in list (only one value by PageOneValue)
GwApi::BoatValue *bvalue3 = pageData.values[2]; // Third element in list
String name3 = xdrDelete(bvalue3->getName()); // Value name
name3 = name3.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue3, logger); // Check if boat data value is to be calibrated
@ -73,7 +73,7 @@ class PageFourValues : public Page
String unit3 = formatValue(bvalue3, *commonData).unit; // Unit of value
// Get boat values #4
GwApi::BoatValue *bvalue4 = pageData.values[3]; // Second element in list (only one value by PageOneValue)
GwApi::BoatValue *bvalue4 = pageData.values[3]; // Fourth element in list
String name4 = xdrDelete(bvalue4->getName()); // Value name
name4 = name4.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue4, logger); // Check if boat data value is to be calibrated

3
lib/obp60task/PageKeelPosition.cpp
View File

@ -86,8 +86,7 @@ public:
float x = 200 + (rInstrument-30)*sin(i/180.0*pi); // x-coordinate dots
float y = 150 - (rInstrument-30)*cos(i/180.0*pi); // y-coordinate cots
const char *ii = " ";
switch (i)
{
switch (i) {
case 0: ii=" "; break; // Use a blank for a empty scale value
case 30 : ii=" "; break;
case 60 : ii=" "; break;

43
lib/obp60task/PageRollPitch.cpp
View File

@ -41,9 +41,9 @@ public:
String backlightMode = config->getString(config->backlight);
int rolllimit = config->getInt(config->rollLimit);
String roffset = config->getString(config->rollOffset);
double rolloffset = roffset.toFloat()/360*(2*PI);
double rolloffset = roffset.toFloat()/360*(2*M_PI);
String poffset = config->getString(config->pitchOffset);
double pitchoffset = poffset.toFloat()/360*(2*PI);
double pitchoffset = poffset.toFloat()/360*(2*M_PI);
// Get boat values for roll
GwApi::BoatValue *bvalue1 = pageData.values[0]; // First element in list (xdrRoll)
@ -55,17 +55,17 @@ public:
}
else{
if(simulation == true){
value1 = (20 + float(random(0, 50)) / 10.0)/360*2*PI;
value1 = (20 + float(random(0, 50)) / 10.0)/360*2*M_PI;
}
else{
value1 = 0;
}
}
if(value1/(2*PI)*360 > -10 && value1/(2*PI)*360 < 10){
svalue1 = String(value1/(2*PI)*360,1); // Convert raw value to string
if(value1/(2*M_PI)*360 > -10 && value1/(2*M_PI)*360 < 10){
svalue1 = String(value1/(2*M_PI)*360,1); // Convert raw value to string
}
else{
svalue1 = String(value1/(2*PI)*360,0);
svalue1 = String(value1/(2*M_PI)*360,0);
}
if(valid1 == true){
svalue1old = svalue1; // Save the old value
@ -80,17 +80,17 @@ public:
}
else{
if(simulation == true){
value2 = (float(random(-5, 5)))/360*2*PI;
value2 = (float(random(-5, 5)))/360*2*M_PI;
}
else{
value2 = 0;
}
}
if(value2/(2*PI)*360 > -10 && value2/(2*PI)*360 < 10){
svalue2 = String(value2/(2*PI)*360,1); // Convert raw value to string
if(value2/(2*PI)*360 > -10 && value2/(2*M_PI)*360 < 10){
svalue2 = String(value2/(2*M_PI)*360,1); // Convert raw value to string
}
else{
svalue2 = String(value2/(2*PI)*360,0);
svalue2 = String(value2/(2*M_PI)*360,0);
}
if(valid2 == true){
svalue2old = svalue2; // Save the old value
@ -99,7 +99,7 @@ public:
// Optical warning by limit violation
if(String(flashLED) == "Limit Violation"){
// Limits for roll
if(value1*360/(2*PI) >= -1*rolllimit && value1*360/(2*PI) <= rolllimit){
if(value1*360/(2*M_PI) >= -1*rolllimit && value1*360/(2*M_PI) <= rolllimit){
setBlinkingLED(false);
setFlashLED(false);
}
@ -177,11 +177,10 @@ public:
// Only scaling +/- 60 degrees
if((i >= 0 && i <= 60) || (i >= 300 && i <= 360)){
// Scaling values
float x = 200 + (rInstrument+25)*sin(i/180.0*pi); // x-coordinate dots
float y = 150 - (rInstrument+25)*cos(i/180.0*pi); // y-coordinate cots
float x = 200 + (rInstrument+25)*sin(i/180.0*M_PI); // x-coordinate dots
float y = 150 - (rInstrument+25)*cos(i/180.0*M_PI); // y-coordinate cots
const char *ii = "";
switch (i)
{
switch (i) {
case 0: ii="0"; break;
case 20 : ii="20"; break;
case 40 : ii="40"; break;
@ -203,11 +202,11 @@ public:
}
// Draw sub scale with dots
float x1c = 200 + rInstrument*sin(i/180.0*pi);
float y1c = 150 - rInstrument*cos(i/180.0*pi);
float x1c = 200 + rInstrument*sin(i/180.0*M_PI);
float y1c = 150 - rInstrument*cos(i/180.0*M_PI);
getdisplay().fillCircle((int)x1c, (int)y1c, 2, commonData->fgcolor);
float sinx=sin(i/180.0*pi);
float cosx=cos(i/180.0*pi);
float sinx=sin(i/180.0*M_PI);
float cosx=cos(i/180.0*M_PI);
// Draw sub scale with lines (two triangles)
if(i % 20 == 0){
@ -229,11 +228,11 @@ public:
// Draw mast position pointer
float startwidth = 8; // Start width of pointer
// value1 = (2 * pi ) - value1; // Mirror coordiante system for pointer, keel and boat
// value1 = (2 * M_PI ) - value1; // Mirror coordiante system for pointer, keel and boat
if(valid1 == true || holdvalues == true || simulation == true){
float sinx=sin(value1 + pi);
float cosx=cos(value1 + pi);
float sinx=sin(value1 + M_PI);
float cosx=cos(value1 + M_PI);
// Normal pointer
// Pointer as triangle with center base 2*width
float xx1 = -startwidth;

120
lib/obp60task/PageSystem.cpp
View File

@ -1,5 +1,15 @@
#if defined BOARD_OBP60S3 || defined BOARD_OBP40S3
/*
* Special system page, called directly with fast key sequence 5,4
* Out of normal page order.
* Consists of some sub-pages with following content:
* 1. Hard and software information
* 2. System settings
* 3. NMEA2000 device list
* 4. SD Card information if available
*/
#include "Pagedata.h"
#include "OBP60Extensions.h"
#include "images/logo64.xbm"
@ -7,8 +17,7 @@
#include "qrcode.h"
#ifdef BOARD_OBP40S3
#include <SD.h>
#include <FS.h>
#include "dirent.h"
#endif
#define STRINGIZE_IMPL(x) #x
@ -19,20 +28,12 @@
#define DISPLAYINFO STRINGIZE(EPDTYPE)
#define GXEPD2INFO STRINGIZE(GXEPD2VERS)
/*
* Special system page, called directly with fast key sequence 5,4
* Out of normal page order.
* Consists of some sub-pages with following content:
* 1. Hard and software information
* 2. System settings
* 3. NMEA2000 device list
*/
class PageSystem : public Page
{
private:
uint64_t chipid;
bool simulation;
bool sdcard;
bool use_sdcard;
String buzzer_mode;
uint8_t buzzer_power;
String cpuspeed;
@ -55,11 +56,12 @@ public:
common.logger->logDebug(GwLog::LOG,"Instantiate PageSystem");
if (hasFRAM) {
mode = fram.read(FRAM_SYSTEM_MODE);
common.logger->logDebug(GwLog::DEBUG, "Loaded mode '%c' from FRAM", mode);
}
chipid = ESP.getEfuseMac();
simulation = common.config->getBool(common.config->useSimuData);
#ifdef BOARD_OBP40S3
sdcard = common.config->getBool(common.config->useSDCard);
use_sdcard = common.config->getBool(common.config->useSDCard);
#endif
buzzer_mode = common.config->getString(common.config->buzzerMode);
buzzer_mode.toLowerCase();
@ -76,7 +78,7 @@ public:
homelon = common.config->getString(common.config->homeLON).toDouble();
}
virtual void setupKeys(){
void setupKeys() {
commonData->keydata[0].label = "EXIT";
commonData->keydata[1].label = "MODE";
commonData->keydata[2].label = "";
@ -85,7 +87,7 @@ public:
commonData->keydata[5].label = "ILUM";
}
virtual int handleKey(int key){
int handleKey(int key) {
// do *NOT* handle key #1 this handled by obp60task as exit
// Switch display mode
commonData->logger->logDebug(GwLog::LOG, "System keyboard handler");
@ -95,7 +97,7 @@ public:
} else if (mode == 'S') {
mode = 'D';
} else if (mode == 'D') {
if (sdcard) {
if (hasSDCard) {
mode = 'C';
} else {
mode = 'N';
@ -117,6 +119,7 @@ public:
}
// standby / deep sleep
if (key == 5) {
commonData->logger->logDebug(GwLog::LOG, "System going into deep sleep mode...");
deepSleep(*commonData);
}
// Code for keylock
@ -132,6 +135,7 @@ public:
}
// standby / deep sleep
if (key == 12) {
commonData->logger->logDebug(GwLog::LOG, "System going into deep sleep mode...");
deepSleep(*commonData);
}
#endif
@ -178,7 +182,7 @@ public:
}
// Logging boat values
LOG_DEBUG(GwLog::LOG,"Drawing at PageSystem");
logger->logDebug(GwLog::LOG, "Drawing at PageSystem, Mode=%c", mode);
// Draw page
//***********************************************************
@ -257,14 +261,37 @@ public:
getdisplay().setCursor(8, y0 + 48);
getdisplay().print("SD-Card:");
getdisplay().setCursor(90, y0 + 48);
if (sdcard) {
uint64_t cardsize = SD.cardSize() / (1024 * 1024);
getdisplay().print(String(cardsize) + String(" MB"));
if (hasSDCard) {
uint64_t cardsize = ((uint64_t) sdcard->csd.capacity) * sdcard->csd.sector_size / (1024 * 1024);
getdisplay().printf("%llu MB", cardsize);
} else {
getdisplay().print("off");
}
#endif
// Uptime
int64_t uptime = esp_timer_get_time() / 1000000;
String uptime_unit;
if (uptime < 120) {
uptime_unit = " seconds";
} else {
if (uptime < 2 * 3600) {
uptime /= 60;
uptime_unit = " minutes";
} else if (uptime < 2 * 3600 * 24) {
uptime /= 3600;
uptime_unit = " hours";
} else {
uptime /= 86400;
uptime_unit = " days";
}
}
getdisplay().setCursor(8, y0 + 80);
getdisplay().print("Uptime:");
getdisplay().setCursor(90, y0 + 80);
getdisplay().print(uptime);
getdisplay().print(uptime_unit);
// CPU speed config / active
getdisplay().setCursor(202, y0);
getdisplay().print("CPU speed:");
@ -371,8 +398,61 @@ public:
x0 = 20;
y0 = 72;
getdisplay().setCursor(x0, y0);
#ifdef BOARD_OBP60S3
// This mode should not be callable by devices without card hardware
// In case of accidential reaching this, display a friendly message
getdisplay().print("This mode is not indended to be reached!\n");
getdisplay().print("There's nothing to see here. Move on.");
#endif
#ifdef BOARD_OBP40S3
getdisplay().print("Work in progress...");
/* TODO
this code should go somewhere else. only for testing purposes here
identify card as OBP-Card:
magic.dat
version.dat
readme.txt
IMAGES/
CHARTS/
LOGS/
DATA/
hint: file access with fopen, fgets, fread, fclose
*/
// Simple test for magic file in root
getdisplay().setCursor(x0, y0 + 32);
String file_magic = MOUNT_POINT "/magic.dat";
logger->logDebug(GwLog::LOG, "Test magicfile: %s", file_magic.c_str());
struct stat st;
if (stat(file_magic.c_str(), &st) == 0) {
getdisplay().printf("File %s exists", file_magic.c_str());
} else {
getdisplay().printf("File %s not found", file_magic.c_str());
}
// Root directory check
DIR* dir = opendir(MOUNT_POINT);
int dy = 0;
if (dir != NULL) {
logger->logDebug(GwLog::LOG, "Root directory: %s", MOUNT_POINT);
struct dirent* entry;
while (((entry = readdir(dir)) != NULL) and (dy < 140)) {
getdisplay().setCursor(x0, y0 + 64 + dy);
getdisplay().print(entry->d_name);
// type 1 is file, type 2 is dir
if (entry->d_type == 2) {
getdisplay().print("/");
}
dy += 20;
logger->logDebug(GwLog::DEBUG, " %s type %d", entry->d_name, entry->d_type);
}
closedir(dir);
} else {
logger->logDebug(GwLog::LOG, "Failed to open root directory");
}
#endif
} else {
// NMEA2000 device list

4
lib/obp60task/PageThreeValues.cpp
View File

@ -51,7 +51,7 @@ class PageThreeValues : public Page
String unit1 = formatValue(bvalue1, *commonData).unit; // Unit of value
// Get boat values #2
GwApi::BoatValue *bvalue2 = pageData.values[1]; // Second element in list (only one value by PageOneValue)
GwApi::BoatValue *bvalue2 = pageData.values[1]; // Second element in list
String name2 = xdrDelete(bvalue2->getName()); // Value name
name2 = name2.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue2, logger); // Check if boat data value is to be calibrated
@ -61,7 +61,7 @@ class PageThreeValues : public Page
String unit2 = formatValue(bvalue2, *commonData).unit; // Unit of value
// Get boat values #3
GwApi::BoatValue *bvalue3 = pageData.values[2]; // Second element in list (only one value by PageOneValue)
GwApi::BoatValue *bvalue3 = pageData.values[2]; // Third element in list
String name3 = xdrDelete(bvalue3->getName()); // Value name
name3 = name3.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue3, logger); // Check if boat data value is to be calibrated

2
lib/obp60task/PageTwoValues.cpp
View File

@ -49,7 +49,7 @@ class PageTwoValues : public Page
String unit1 = formatValue(bvalue1, *commonData).unit; // Unit of value
// Get boat values #2
GwApi::BoatValue *bvalue2 = pageData.values[1]; // Second element in list (only one value by PageOneValue)
GwApi::BoatValue *bvalue2 = pageData.values[1]; // Second element in list
String name2 = xdrDelete(bvalue2->getName()); // Value name
name2 = name2.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue2, logger); // Check if boat data value is to be calibrated

22
lib/obp60task/PageWindRose.cpp
View File

@ -48,7 +48,7 @@ public:
String flashLED = config->getString(config->flashLED);
String backlightMode = config->getString(config->backlight);
// Get boat values for AWA
// Get boat value for AWA
GwApi::BoatValue *bvalue1 = pageData.values[0]; // First element in list (only one value by PageOneValue)
String name1 = xdrDelete(bvalue1->getName()); // Value name
name1 = name1.substring(0, 6); // String length limit for value name
@ -63,8 +63,8 @@ public:
unit1old = unit1; // Save old unit
}
// Get boat values for AWS
GwApi::BoatValue *bvalue2 = pageData.values[1]; // First element in list (only one value by PageOneValue)
// Get boat value for AWS
GwApi::BoatValue *bvalue2 = pageData.values[1]; // Second element in list
String name2 = xdrDelete(bvalue2->getName()); // Value name
name2 = name2.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue2, logger); // Check if boat data value is to be calibrated
@ -77,8 +77,8 @@ public:
unit2old = unit2; // Save old unit
}
// Get boat values TWD
GwApi::BoatValue *bvalue3 = pageData.values[2]; // Second element in list (only one value by PageOneValue)
// Get boat value for TWD
GwApi::BoatValue *bvalue3 = pageData.values[2]; // Third element in list
String name3 = xdrDelete(bvalue3->getName()); // Value name
name3 = name3.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue3, logger); // Check if boat data value is to be calibrated
@ -91,8 +91,8 @@ public:
unit3old = unit3; // Save old unit
}
// Get boat values TWS
GwApi::BoatValue *bvalue4 = pageData.values[3]; // Second element in list (only one value by PageOneValue)
// Get boat value for TWS
GwApi::BoatValue *bvalue4 = pageData.values[3]; // Fourth element in list
String name4 = xdrDelete(bvalue4->getName()); // Value name
name4 = name4.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue4, logger); // Check if boat data value is to be calibrated
@ -105,8 +105,8 @@ public:
unit4old = unit4; // Save old unit
}
// Get boat values DBT
GwApi::BoatValue *bvalue5 = pageData.values[4]; // Second element in list (only one value by PageOneValue)
// Get boat value for DBT
GwApi::BoatValue *bvalue5 = pageData.values[4]; // Fifth element in list
String name5 = xdrDelete(bvalue5->getName()); // Value name
name5 = name5.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue5, logger); // Check if boat data value is to be calibrated
@ -119,8 +119,8 @@ public:
unit5old = unit5; // Save old unit
}
// Get boat values STW
GwApi::BoatValue *bvalue6 = pageData.values[5]; // Second element in list (only one value by PageOneValue)
// Get boat value for STW
GwApi::BoatValue *bvalue6 = pageData.values[5]; // Sixth element in list
String name6 = xdrDelete(bvalue6->getName()); // Value name
name6 = name6.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue6, logger); // Check if boat data value is to be calibrated

57
lib/obp60task/PageWindRoseFlex.cpp
View File

@ -48,7 +48,7 @@ public:
String flashLED = config->getString(config->flashLED);
String backlightMode = config->getString(config->backlight);
// Get boat values for AWA
// Get boat values #1
GwApi::BoatValue *bvalue1 = pageData.values[0]; // First element in list (only one value by PageOneValue)
String name1 = xdrDelete(bvalue1->getName()); // Value name
name1 = name1.substring(0, 6); // String length limit for value name
@ -63,8 +63,8 @@ public:
unit1old = unit1; // Save old unit
}
// Get boat values for AWS
GwApi::BoatValue *bvalue2 = pageData.values[1]; // First element in list (only one value by PageOneValue)
// Get boat values #2
GwApi::BoatValue *bvalue2 = pageData.values[1]; // Second element in list
String name2 = xdrDelete(bvalue2->getName()); // Value name
name2 = name2.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue2, logger); // Check if boat data value is to be calibrated
@ -77,8 +77,8 @@ public:
unit2old = unit2; // Save old unit
}
// Get boat values TWD
GwApi::BoatValue *bvalue3 = pageData.values[2]; // Second element in list (only one value by PageOneValue)
// Get boat values #3
GwApi::BoatValue *bvalue3 = pageData.values[2]; // Third element in list
String name3 = xdrDelete(bvalue3->getName()); // Value name
name3 = name3.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue3, logger); // Check if boat data value is to be calibrated
@ -91,8 +91,8 @@ public:
unit3old = unit3; // Save old unit
}
// Get boat values TWS
GwApi::BoatValue *bvalue4 = pageData.values[3]; // Second element in list (only one value by PageOneValue)
// Get boat values #4
GwApi::BoatValue *bvalue4 = pageData.values[3]; // Fourth element in list
String name4 = xdrDelete(bvalue4->getName()); // Value name
name4 = name4.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue4, logger); // Check if boat data value is to be calibrated
@ -105,8 +105,8 @@ public:
unit4old = unit4; // Save old unit
}
// Get boat values DBT
GwApi::BoatValue *bvalue5 = pageData.values[4]; // Second element in list (only one value by PageOneValue)
// Get boat values #5
GwApi::BoatValue *bvalue5 = pageData.values[4]; // Fifth element in list
String name5 = xdrDelete(bvalue5->getName()); // Value name
name5 = name5.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue5, logger); // Check if boat data value is to be calibrated
@ -119,8 +119,8 @@ public:
unit5old = unit5; // Save old unit
}
// Get boat values STW
GwApi::BoatValue *bvalue6 = pageData.values[5]; // Second element in list (only one value by PageOneValue)
// Get boat values #5
GwApi::BoatValue *bvalue6 = pageData.values[5]; // Sixth element in list
String name6 = xdrDelete(bvalue6->getName()); // Value name
name6 = name6.substring(0, 6); // String length limit for value name
calibrationData.calibrateInstance(bvalue6, logger); // Check if boat data value is to be calibrated
@ -192,7 +192,7 @@ public:
getdisplay().setFont(&DSEG7Classic_BoldItalic20pt7b);
getdisplay().setCursor(295, 65);
if(valid3 == true){
// getdisplay().print(abs(value3 * 180 / PI), 0); // Value
// getdisplay().print(abs(value3 * 180 / M_PI), 0); // Value
getdisplay().print(svalue4); // Value
}
else{
@ -236,7 +236,6 @@ public:
// Draw wind rose
int rInstrument = 110; // Radius of grafic instrument
float pi = 3.141592;
getdisplay().fillCircle(200, 150, rInstrument + 10, commonData->fgcolor); // Outer circle
getdisplay().fillCircle(200, 150, rInstrument + 7, commonData->bgcolor); // Outer circle
@ -246,11 +245,10 @@ public:
for(int i=0; i<360; i=i+10)
{
// Scaling values
float x = 200 + (rInstrument-30)*sin(i/180.0*pi); // x-coordinate dots
float y = 150 - (rInstrument-30)*cos(i/180.0*pi); // y-coordinate dots
float x = 200 + (rInstrument-30)*sin(i/180.0*M_PI); // x-coordinate dots
float y = 150 - (rInstrument-30)*cos(i/180.0*M_PI); // y-coordinate dots
const char *ii = "";
switch (i)
{
switch (i) {
case 0: ii="0"; break;
case 30 : ii="30"; break;
case 60 : ii="60"; break;
@ -277,11 +275,11 @@ public:
}
// Draw sub scale with dots
float x1c = 200 + rInstrument*sin(i/180.0*pi);
float y1c = 150 - rInstrument*cos(i/180.0*pi);
float x1c = 200 + rInstrument*sin(i/180.0*M_PI);
float y1c = 150 - rInstrument*cos(i/180.0*M_PI);
getdisplay().fillCircle((int)x1c, (int)y1c, 2, commonData->fgcolor);
float sinx=sin(i/180.0*pi);
float cosx=cos(i/180.0*pi);
float sinx=sin(i/180.0*M_PI);
float cosx=cos(i/180.0*M_PI);
// Draw sub scale with lines (two triangles)
if(i % 30 == 0){
@ -332,26 +330,18 @@ public:
//*******************************************************************************************
// Show value6, so that it does not collide with the wind pointer
if ( cos(value1) > 0){
getdisplay().setFont(&DSEG7Classic_BoldItalic16pt7b);
if (cos(value1) > 0){
getdisplay().setCursor(160, 200);
getdisplay().print(svalue6); // Value
getdisplay().setFont(&Ubuntu_Bold8pt8b);
getdisplay().setCursor(190, 215);
getdisplay().print(" ");
if(holdvalues == false){
getdisplay().print(unit6); // Unit
}
else{
getdisplay().print(unit6old); // Unit
}
}
else{
getdisplay().setFont(&DSEG7Classic_BoldItalic16pt7b);
} else{
getdisplay().setCursor(160, 130);
getdisplay().print(svalue6); // Value
getdisplay().setFont(&Ubuntu_Bold8pt8b);
getdisplay().setCursor(190, 90);
}
getdisplay().print(" ");
if(holdvalues == false){
getdisplay().print(unit6); // Unit
@ -359,8 +349,6 @@ if ( cos(value1) > 0){
else{
getdisplay().print(unit6old); // Unit
}
}
return PAGE_UPDATE;
};
@ -380,7 +368,6 @@ PageDescription registerPageWindRoseFlex(
"WindRoseFlex", // Page name
createPage, // Action
6, // Number of bus values depends on selection in Web configuration; was zero
//{"AWA", "AWS", "COG", "SOG", "TWD", "TWS"}, // Bus values we need in the page, modified for WindRose2
true // Show display header on/off
);

5
lib/obp60task/Pagedata.h
View File

@ -123,6 +123,7 @@ class Page{
int refreshtime = 1000;
virtual int displayPage(PageData &pageData)=0;
virtual void displayNew(PageData &pageData){}
virtual void leavePage(PageData &pageData){}
virtual void setupKeys() {
#ifdef HARDWARE_V21
commonData->keydata[0].label = "";
@ -197,7 +198,7 @@ typedef struct{
double value;
String svalue;
String unit;
} FormatedData;
} FormattedData;
// Formatter for boat values
FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata);
FormattedData formatValue(GwApi::BoatValue *value, CommonData &commondata);

15
lib/obp60task/config.json
View File

@ -1117,6 +1117,21 @@
"obp60":"true"
}
},
{
"name": "valueprecision",
"label": "Display value precision",
"type": "list",
"default": "2",
"description": "Maximum number of decimal places to display [1|2]",
"list": [
"1",
"2"
],
"category": "OBP60 Display",
"capabilities": {
"obp60":"true"
}
},
{
"name": "backlight",
"label": "Backlight Mode",

15
lib/obp60task/config_obp40.json
View File

@ -1129,6 +1129,21 @@
"obp40": "true"
}
},
{
"name": "valueprecision",
"label": "Display value precision",
"type": "list",
"default": "2",
"description": "Maximum number of decimal places to display [1|2]",
"list": [
"1",
"2"
],
"category": "OBP40 Display",
"capabilities": {
"obp40":"true"
}
},
{
"name": "backlight",
"label": "Backlight Mode",

179
lib/obp60task/gen_set.py
View File

@ -1,46 +1,55 @@
#!/usr/bin/env python3
# A tool to generate that part of config.json that deals with pages and fields.
#
#Usage: 1. modify this script (e.g.add a page, change number of fields, etc.)
# 2. Delete all lines from config.json from the curly backet before "name": "page1type" to o the end of the file (as of today, delete from line 917 to the end of the File)
# 3. run ./gen_set.py >> config.json
"""
A tool to generate that part of config.json that deals with pages and fields.
Usage example:
1. Delete all lines from config.json from the curly backet before
"name": "page1type" to the end of the file
2. run ./gen_set.py -d obp60 -p 10 >> config.json
TODO Better handling of default pages
"""
import os
import sys
import getopt
import re
import json
# List of all pages and the number of parameters they expect.
no_of_fields_per_page = {
"Wind": 0,
"XTETrack": 0,
"Battery2": 0,
"Battery": 0,
"BME280": 0,
"Clock": 0,
"Compass" : 0,
"DST810": 0,
"Fluid": 1,
"FourValues2": 4,
"FourValues": 4,
"Generator": 0,
"KeelPosition": 0,
"OneValue": 1,
"RollPitch": 2,
"RudderPosition": 0,
"SixValues" : 6,
"Solar": 0,
"ThreeValues": 3,
"TwoValues": 2,
"Voltage": 0,
"WhitePage": 0,
"WindPlot": 0,
"WindRose": 0,
"WindRoseFlex": 6,
}
__version__ = "0.2"
# No changes needed beyond this point
# max number of pages supported by OBP60
no_of_pages = 10
def detect_pages(filename):
# returns a dictionary with page name and the number of gui fields
pagefiles = []
with open(filename, 'r') as fh:
pattern = r'extern PageDescription\s*register(Page[^;\s]*)'
for line in fh:
if "extern PageDescription" in line:
match = re.search(pattern, line)
if match:
pagefiles.append(match.group(1))
try:
pagefiles.remove('PageSystem')
except ValueError:
pass
pagedata = {}
for pf in pagefiles:
filename = pf + ".cpp"
with open(filename, 'r') as fh:
content = fh.read()
pattern = r'PageDescription\s*?register' + pf + r'\s*\(\s*"([^"]+)".*?\n\s*(\d+)'
match = re.search(pattern, content, re.DOTALL)
if match:
pagedata[match.group(1)] = int(match.group(2))
return pagedata
def get_default_page(pageno):
# Default selection for each page
default_pages = [
default_pages = (
"Voltage",
"WindRose",
"OneValue",
@ -50,22 +59,30 @@ default_pages = [
"FourValues2",
"Clock",
"RollPitch",
"Battery2",
]
numbers = [
"one",
"two",
"three",
"four",
"five",
"six",
"seven",
"eight",
"nine",
"ten",
]
pages = sorted(no_of_fields_per_page.keys())
max_no_of_fields_per_page = max(no_of_fields_per_page.values())
"Battery2"
)
if pageno > len(default_pages):
return "OneValue"
return default_pages[pageno - 1]
def number_to_text(number):
if number < 0 or number > 99:
raise ValueError("Only numbers from 0 to 99 are allowed.")
numbers = ("zero", "one", "two", "three", "four", "five", "six", "seven",
"eight", "nine", "ten", "eleven", "twelve", "thirteen", "fourteen",
"fifteen", "sixteen", "seventeen", "eighteen", "nineteen")
tens = ("", "", "twenty", "thirty", "forty", "fifty", "sixty", "seventy",
"eighty", "ninety")
if number < 20:
return numbers[number]
else:
q, r = divmod(number, 10)
return tens[q] + numbers[r]
def create_json(device, no_of_pages, pagedata):
pages = sorted(pagedata.keys())
max_no_of_fields_per_page = max(pagedata.values())
output = []
@ -74,11 +91,11 @@ for page_no in range(1, no_of_pages + 1):
"name": f"page{page_no}type",
"label": "Type",
"type": "list",
"default": default_pages[page_no - 1],
"default": get_default_page(page_no),
"description": f"Type of page for page {page_no}",
"list": pages,
"category": f"OBP60 Page {page_no}",
"capabilities": {"obp60": "true"},
"category": f"{device.upper()} Page {page_no}",
"capabilities": {device.lower(): "true"},
"condition": [{"visiblePages": vp} for vp in range(page_no, no_of_pages + 1)],
#"fields": [],
}
@ -90,13 +107,13 @@ for page_no in range(1, no_of_pages + 1):
"label": f"Field {field_no}",
"type": "boatData",
"default": "",
"description": f"The display for field {numbers[field_no - 1]}",
"category": f"OBP60 Page {page_no}",
"capabilities": {"obp60": "true"},
"description": "The display for field {}".format(number_to_text(field_no)),
"category": f"{device.upper()} Page {page_no}",
"capabilities": {device.lower(): "true"},
"condition": [
{f"page{page_no}type": page}
for page in pages
if no_of_fields_per_page[page] >= field_no
if pagedata[page] >= field_no
],
}
output.append(field_data)
@ -116,17 +133,47 @@ for page_no in range(1, no_of_pages + 1):
{"l":"Fuel Gasoline (6)","v":"6"}
],
"description": "Fluid type in tank",
"category": f"OBP60 Page {page_no}",
"category": f"{device.upper()} Page {page_no}",
"capabilities": {
"obp60":"true"
device.lower(): "true"
},
"condition":[{f"page{page_no}type":"Fluid"}]
}
output.append(fluid_data)
json_output = json.dumps(output, indent=4)
# print omitting first and last line containing [ ] of JSON array
#print(json_output[1:-1])
return json.dumps(output, indent=4)
def usage():
print("{} v{}".format(os.path.basename(__file__), __version__))
print()
print("Command line options")
print(" -d --device device name to use e.g. obp60")
print(" -p --pages number of pages to create")
print(" -h show this help")
print()
if __name__ == '__main__':
try:
options, remainder = getopt.getopt(sys.argv[1:], 'd:p:', ['device=','--pages='])
except getopt.GetoptError as err:
print(err)
usage()
sys.exit(2)
device = "obp60"
no_of_pages = 10
for opt, arg in options:
if opt in ('-d', '--device'):
device = arg
elif opt in ('-p', '--pages'):
no_of_pages = int(arg)
elif opt == '-h':
usage()
sys.exit(0)
# automatic detect pages and number of fields from sourcecode
pagedata = detect_pages("obp60task.cpp")
json_output = create_json(device, no_of_pages, pagedata)
# print omitting first line containing [ of JSON array
print(json_output[1:])
# print(",")

12
lib/obp60task/index.js Normal file
View File

@ -0,0 +1,12 @@
(function(){
const api=window.esp32nmea2k;
if (! api) return;
const tabName="OBP60";
api.registerListener((id, data) => {
// if (!data.testboard) return; //do nothing if we are not active
let page = api.addTabPage(tabName, "OBP60");
api.addEl('button', '', page, 'Screenshot').addEventListener('click', function (ev) {
window.open('/api/user/OBP60Task/screenshot', 'screenshot');
})
}, api.EVENTS.init);
})();

83
lib/obp60task/obp60task.cpp
View File

@ -18,8 +18,6 @@
#ifdef BOARD_OBP40S3
#include "driver/rtc_io.h" // Needs for weakup from deep sleep
#include <FS.h> // SD-Card access
#include <SD.h>
#include <SPI.h>
#endif
@ -34,7 +32,6 @@
#include "OBP60QRWiFi.h" // Functions lib for WiFi QR code
#include "OBPSensorTask.h" // Functions lib for sensor data
// Global vars
bool initComplete = false; // Initialization complete
int taskRunCounter = 0; // Task couter for loop section
@ -47,63 +44,23 @@ void OBP60Init(GwApi *api){
GwConfigHandler *config = api->getConfig();
// Set a new device name and hidden the original name in the main config
String devicename = api->getConfig()->getConfigItem(api->getConfig()->deviceName,true)->asString();
api->getConfig()->setValue(GwConfigDefinitions::systemName, devicename, GwConfigInterface::ConfigType::HIDDEN);
String devicename = config->getConfigItem(config->deviceName, true)->asString();
config->setValue(GwConfigDefinitions::systemName, devicename, GwConfigInterface::ConfigType::HIDDEN);
api->getLogger()->logDebug(GwLog::LOG,"obp60init running");
logger->prefix = devicename + ":";
logger->logDebug(GwLog::LOG,"obp60init running");
// Check I2C devices
// Init power
String powermode = config->getConfigItem(config->powerMode,true)->asString();
logger->logDebug(GwLog::DEBUG, "Power Mode is: %s", powermode.c_str());
powerInit(powermode);
// Init hardware
hardwareInit(api);
// Init power rail 5.0V
String powermode = api->getConfig()->getConfigItem(api->getConfig()->powerMode,true)->asString();
api->getLogger()->logDebug(GwLog::DEBUG,"Power Mode is: %s", powermode.c_str());
if(powermode == "Max Power" || powermode == "Only 5.0V"){
#ifdef HARDWARE_V21
setPortPin(OBP_POWER_50, true); // Power on 5.0V rail
#endif
#ifdef BOARD_OBP40S3
setPortPin(OBP_POWER_EPD, true);// Power on ePaper display
setPortPin(OBP_POWER_SD, true); // Power on SD card
#endif
}
else{
#ifdef HARDWARE_V21
setPortPin(OBP_POWER_50, false); // Power off 5.0V rail
#endif
#ifdef BOARD_OBP40S3
setPortPin(OBP_POWER_EPD, false);// Power off ePaper display
setPortPin(OBP_POWER_SD, false); // Power off SD card
#endif
}
#ifdef BOARD_OBP40S3
bool sdcard = config->getBool(config->useSDCard);
if (sdcard) {
SPIClass SD_SPI = SPIClass(HSPI);
SD_SPI.begin(SD_SPI_CLK, SD_SPI_MISO, SD_SPI_MOSI);
if (SD.begin(SD_SPI_CS, SD_SPI, 80000000)) {
String sdtype = "unknown";
uint8_t cardType = SD.cardType();
switch (cardType) {
case CARD_MMC:
sdtype = "MMC";
break;
case CARD_SD:
sdtype = "SDSC";
break;
case CARD_SDHC:
sdtype = "SDHC";
break;
}
uint64_t cardSize = SD.cardSize() / (1024 * 1024);
LOG_DEBUG(GwLog::LOG,"SD card type %s of size %d MB detected", sdtype, cardSize);
}
}
// Deep sleep wakeup configuration
esp_sleep_enable_ext0_wakeup(OBP_WAKEWUP_PIN, 0); // 1 = High, 0 = Low
rtc_gpio_pullup_en(OBP_WAKEWUP_PIN); // Activate pullup resistor
@ -112,7 +69,7 @@ void OBP60Init(GwApi *api){
// Settings for e-paper display
String fastrefresh = api->getConfig()->getConfigItem(api->getConfig()->fastRefresh,true)->asString();
api->getLogger()->logDebug(GwLog::DEBUG,"Fast Refresh Mode is: %s", fastrefresh.c_str());
logger->logDebug(GwLog::DEBUG, "Fast Refresh Mode is: %s", fastrefresh.c_str());
#ifdef DISPLAY_GDEY042T81
if(fastrefresh == "true"){
static const bool useFastFullUpdate = true; // Enable fast full display update only for GDEY042T81
@ -131,11 +88,11 @@ void OBP60Init(GwApi *api){
// Get CPU speed
int freq = getCpuFrequencyMhz();
api->getLogger()->logDebug(GwLog::LOG,"CPU speed at boot: %i MHz", freq);
logger->logDebug(GwLog::LOG,"CPU speed at boot: %i MHz", freq);
// Settings for backlight
String backlightMode = api->getConfig()->getConfigItem(api->getConfig()->backlight,true)->asString();
api->getLogger()->logDebug(GwLog::DEBUG,"Backlight Mode is: %s", backlightMode.c_str());
logger->logDebug(GwLog::DEBUG,"Backlight Mode is: %s", backlightMode.c_str());
uint brightness = uint(api->getConfig()->getConfigItem(api->getConfig()->blBrightness,true)->asInt());
String backlightColor = api->getConfig()->getConfigItem(api->getConfig()->blColor,true)->asString();
if(String(backlightMode) == "On"){
@ -150,7 +107,7 @@ void OBP60Init(GwApi *api){
// Settings flash LED mode
String ledMode = api->getConfig()->getConfigItem(api->getConfig()->flashLED,true)->asString();
api->getLogger()->logDebug(GwLog::DEBUG,"LED Mode is: %s", ledMode.c_str());
logger->logDebug(GwLog::DEBUG,"LED Mode is: %s", ledMode.c_str());
if(String(ledMode) == "Off"){
setBlinkingLED(false);
}
@ -282,7 +239,7 @@ void registerAllPages(PageList &list){
extern PageDescription registerPageWindRose;
list.add(&registerPageWindRose);
extern PageDescription registerPageWindRoseFlex;
list.add(&registerPageWindRoseFlex); //
list.add(&registerPageWindRoseFlex);
extern PageDescription registerPageVoltage;
list.add(&registerPageVoltage);
extern PageDescription registerPageDST810;
@ -789,7 +746,7 @@ void OBP60Task(GwApi *api){
double homelon = commonData.config->getString(commonData.config->homeLON).toDouble();
bool homevalid = homelat >= -180.0 and homelat <= 180 and homelon >= -90.0 and homelon <= 90.0;
if (homevalid) {
LOG_DEBUG(GwLog::LOG, "Home location set to %f : %f", homelat, homelon);
LOG_DEBUG(GwLog::LOG, "Home location set to lat=%f, lon=%f", homelat, homelon);
} else {
LOG_DEBUG(GwLog::LOG, "No valid home location found");
}
@ -823,6 +780,7 @@ void OBP60Task(GwApi *api){
//####################################################################################
bool systemPage = false;
bool systemPageNew = false;
Page *currentPage;
while (true){
delay(100); // Delay 100ms (loop time)
@ -875,6 +833,7 @@ void OBP60Task(GwApi *api){
systemPage = true; // System page is out of band
syspage->setupKeys();
keyboardMessage = 0;
systemPageNew = true;
}
else {
currentPage = pages[pageNumber].page;
@ -971,6 +930,7 @@ void OBP60Task(GwApi *api){
else{
getdisplay().fillScreen(commonData.fgcolor); // Clear display
#ifdef DISPLAY_GDEY042T81
getdisplay().hibernate(); // Set display in hybenate mode
getdisplay().init(115200, true, 2, false); // Init for Waveshare boards with "clever" reset circuit, 2ms reset pulse
#else
getdisplay().init(115200); // Init for normal displays
@ -998,6 +958,7 @@ void OBP60Task(GwApi *api){
else{
getdisplay().fillScreen(commonData.fgcolor); // Clear display
#ifdef DISPLAY_GDEY042T81
getdisplay().hibernate(); // Set display in hybenate mode
getdisplay().init(115200, true, 2, false); // Init for Waveshare boards with "clever" reset circuit, 2ms reset pulse
#else
getdisplay().init(115200); // Init for normal displays
@ -1022,6 +983,7 @@ void OBP60Task(GwApi *api){
else{
getdisplay().fillScreen(commonData.fgcolor); // Clear display
#ifdef DISPLAY_GDEY042T81
getdisplay().hibernate(); // Set display in hybenate mode
getdisplay().init(115200, true, 2, false); // Init for Waveshare boards with "clever" reset circuit, 2ms reset pulse
#else
getdisplay().init(115200); // Init for normal displays
@ -1070,6 +1032,10 @@ void OBP60Task(GwApi *api){
if (systemPage) {
displayFooter(commonData);
PageData sysparams; // empty
if (systemPageNew) {
syspage->displayNew(sysparams);
systemPageNew = false;
}
syspage->displayPage(sysparams);
}
else {
@ -1086,7 +1052,8 @@ void OBP60Task(GwApi *api){
}
else{
if (lastPage != pageNumber){
if (hasFRAM) fram.write(FRAM_PAGE_NO, pageNumber); // remember page for device restart
pages[lastPage].page->leavePage(pages[lastPage].parameters); // call page cleanup code
if (hasFRAM) fram.write(FRAM_PAGE_NO, pageNumber); // remember new page for device restart
currentPage->setupKeys();
currentPage->displayNew(pages[pageNumber].parameters);
lastPage = pageNumber;