Some more improvements for OBP40, mainly building

lib/obp60task/OBP60Extensions.cpp

@@ -326,12 +326,14 @@ void displayHeader(CommonData &commonData, GwApi::BoatValue *date, GwApi::BoatVa
         usbRxOld = commonData.status.usbRx;
         usbTxOld = commonData.status.usbTx;
 
+#ifdef HARDWARE_V21
         // Display key lock status
         if (commonData.keylock) {
             getdisplay().drawXBitmap(170, 1, lock_bits, icon_width, icon_height, commonData.fgcolor);
         } else {
             getdisplay().drawXBitmap(166, 1, swipe_bits, swipe_width, swipe_height, commonData.fgcolor);
         }
+#endif
 
         // Heartbeat as dot
         getdisplay().setTextColor(commonData.fgcolor);

lib/obp60task/README

@@ -7,7 +7,12 @@ Important information:
 THIS BRANCH IS NOT INTENDED TO MERGE INTO "master"!
 ***************************************************
 
-platformio.ini adapted to compile directly
+platformio.ini adapted to compile directly. For compile use matching
+environent:
+    pio run -e obp40
+
+for upload to device:
+    pio run -e obp40 -t upload
 
 Differences to OBP60
 --------------------

lib/obp60task/obp60task.cpp

@@ -327,8 +327,10 @@ void OBP60Task(GwApi *api){
     commonData.logger=logger;
     commonData.config=config;
 
+#ifdef HARDWARE_V21
     // Keyboard coordinates for page footer
     initKeys(commonData);
+#endif
 
     tN2kMsg N2kMsg;
 
@@ -686,10 +688,12 @@ void OBP60Task(GwApi *api){
                     }
                     //call the page code
                     LOG_DEBUG(GwLog::DEBUG,"calling page %d",pageNumber);
+#ifdef HARDWARE_V21
                     // Show footer if enabled (together with header)
                     if (pages[pageNumber].description && pages[pageNumber].description->header){
                         displayFooter(commonData);
                     }
+#endif
                     currentPage->displayPage(pages[pageNumber].parameters);
                 }
             }

lib/obp60task/obp60task.h

@@ -35,6 +35,11 @@
     // OBP60 Task
     void OBP60Task(GwApi *param);
     DECLARE_USERTASK_PARAM(OBP60Task, 35000);   // Need 35k RAM as stack size
+    #ifdef HARDWARE_V21
     DECLARE_CAPABILITY(obp60,true);
+    #endif
+    #ifdef HARDWARE_LIGHT
+    DECLARE_CAPABILITY(obp40,true)
+    #endif
     DECLARE_STRING_CAPABILITY(HELP_URL, "https://obp60-v2-docu.readthedocs.io/de/latest/"); // Link to help pages
 #endif

lib/obp60task/platformio.ini

@@ -14,7 +14,7 @@ board = obp60_s3_light_n8r8   #ESP32-S3 N8R8, 8MB flash, 8MB PSRAM, OBP60 clone
 board_build.partitions = default_8MB.csv #ESP32-S3 N8, 8MB flash
 #board_build.partitions = default_16MB.csv #ESP32-S3 N16, 16MB flash
 framework = arduino
-lib_deps = 
+lib_deps =
     ${basedeps.lib_deps}
     Wire
     SPI
@@ -60,3 +60,46 @@ upload_port = /dev/ttyUSB0          #OBP60 clone
 upload_protocol = esptool           #firmware upload via USB OTG seriell, by first upload need to set the ESP32-S3 in the upload mode with shortcut GND to Pin27 
 upload_speed = 230400
 monitor_speed = 115200
+
+[env:obp40]
+platform = espressif32@6.8.1
+board_build.variants_dir = variants
+board = obp60_s3_light_n8r8   #ESP32-S3 N8R8, 8MB flash, 8MB PSRAM, OBP60 clone
+board_build.partitions = default_8MB.csv #ESP32-S3 N8, 8MB flash
+custom_config = config_obp40.json
+framework = arduino
+lib_deps =
+    ${basedeps.lib_deps}
+    Wire
+    SPI
+    SD
+    esphome/AsyncTCP-esphome@2.0.1
+    robtillaart/PCF8574@0.3.9
+    adafruit/Adafruit Unified Sensor @ 1.1.13
+    blemasle/MCP23017@2.0.0
+    adafruit/Adafruit BusIO@1.5.0
+    adafruit/Adafruit GFX Library@1.11.9
+    #zinggjm/GxEPD2@1.5.8
+    #https://github.com/ZinggJM/GxEPD2
+    https://github.com/thooge/GxEPD2
+    sstaub/Ticker@4.4.0
+    adafruit/Adafruit BMP280 Library@2.6.2
+    adafruit/Adafruit BME280 Library@2.2.2
+    adafruit/Adafruit BMP085 Library@1.2.1
+    enjoyneering/HTU21D@1.2.1
+    robtillaart/INA226@0.2.0
+    paulstoffregen/OneWire@2.3.8
+    milesburton/DallasTemperature@3.11.0
+    signetica/SunRise@2.0.2
+    adafruit/Adafruit FRAM I2C@^2.0.3
+build_flags=
+    #https://thingpulse.com/usb-settings-for-logging-with-the-esp32-s3-in-platformio/?srsltid=AfmBOopGskbkr4GoeVkNlFaZXe_zXkLceKF6Rn-tmoXABCeAR2vWsdHL
+    -D DISABLE_DIAGNOSTIC_OUTPUT    #Disable diagnostic output for GxEPD2 lib
+    -D BOARD_OBP60S3                #Board OBP60 V2.1 with ESP32S3
+    -D HARDWARE_LIGHT               #OBP60 hardware clone (OBP40)
+    -D DISPLAY_GDEY042T81           #new E-Ink display from Waveshare, R10 2.2 ohm
+    ${env.build_flags}
+upload_port = /dev/ttyUSB0          #OBP60 clone
+upload_protocol = esptool           #firmware upload via USB OTG seriell, by first upload need to set the ESP32-S3 in the upload mode with shortcut GND to Pin27
+upload_speed = 230400
+monitor_speed = 115200