thooge/esp32-nmea2000-obp60
1
0
Fork 0
mirror of https://github.com/thooge/esp32-nmea2000-obp60.git synced 2026-03-28 18:06:37 +01:00
Code Releases Activity

Calibration feature switchable as compiler option,

Browse Source 
new page code example by page windrose
This commit is contained in:
Thomas Hooge
2025-08-29 19:21:29 +02:00
parent 9a04029cb4
commit 601d56ee49
14 changed files with 191 additions and 113 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
lib/obp60task/platformio.ini
View File

@@ -51,6 +51,8 @@ build_flags=
# -D DISPLAY_GYE042A87 #alternativ E-Ink display from Genyo Optical, R10 2.2 ohm - medium
# -D DISPLAY_SE0420NQ04 #alternativ E-Ink display from SID Technology, R10 2.2 ohm - bad (burn in effects)
# -D DISPLAY_ZJY400300-042CAAMFGN #alternativ E-Ink display from ZZE Technology, R10 2.2 ohm - very good
# -D ENABLE_TRUEWIND # calculate true wind data (default off)
# -D ENABLE_CALIBRATION # boat data calibration (default off)
${env.build_flags}
#CONFIG_ESP_TASK_WDT_TIMEOUT_S = 10 #Task Watchdog timeout period (seconds) [1...60] 5 default
upload_port = /dev/ttyACM0 #OBP60 download via USB-C direct
@@ -92,8 +94,10 @@ build_flags=
-D HARDWARE_V10 #OBP40 hardware revision V1.0 SKU:DIE07300S V1.1 (CrowPanel 4.2)
-D DISPLAY_GDEY042T81 #new E-Ink display from Good Display (Waveshare), R10 2.2 ohm - good (contast lost by shunshine)
#-D DISPLAY_ZJY400300-042CAAMFGN #alternativ E-Ink display from ZZE Technology, R10 2.2 ohm - very good
#-D LIPO_ACCU_1200 #Hardware extension, LiPo accu 3,7V 1200mAh
#-D VOLTAGE_SENSOR #Hardware extension, LiPo voltage sensor with two resistors
# -D LIPO_ACCU_1200 #Hardware extension, LiPo accu 3,7V 1200mAh
# -D VOLTAGE_SENSOR #Hardware extension, LiPo voltage sensor with two resistors
# -D ENABLE_TRUEWIND # calculate true wind data (default off)
# -D ENABLE_CALIBRATION # boat data calibration (default off)
${env.build_flags}
upload_port = /dev/ttyUSB0 #OBP40 download via external USB/Serail converter
upload_protocol = esptool #firmware upload via USB OTG seriell, by first upload need to set the ESP32-S3 in the upload mode with shortcut GND to Pin27