thooge
/
esp32-nmea2000-obp60
mirror of https://github.com/thooge/esp32-nmea2000-obp60.git
1
0
Fork 0
Code Releases Activity

Change back to plaformio.ini OBP60

This commit is contained in:
norbert-walter 2025-01-19 00:23:22 +01:00
parent e7216e6d2b
commit 87a7a79358
1 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
lib/obp60task/platformio.ini
View File

@ -9,10 +9,10 @@ board_build.variants_dir = variants
#board = obp60_s3_n8 #ESP32-S3 N8, 8MB flash, no PSRAM
#board = obp60_s3_n16 #ESP32-S3 N16,16MB flash, no PSRAM, zero series
#board = obp60_s3_n8r8 #ESP32-S3 N8R8, 8MB flash, 8MB PSRAM
#board = obp60_s3_n16r8 #ESP32-S3 N16R8, 16MB flash, 8MB PSRAM, production series
board = obp60_s3_light_n8r8 #ESP32-S3 N8R8, 8MB flash, 8MB PSRAM, OBP60 clone
board_build.partitions = default_8MB.csv #ESP32-S3 N8, 8MB flash
#board_build.partitions = default_16MB.csv #ESP32-S3 N16, 16MB flash
board = obp60_s3_n16r8 #ESP32-S3 N16R8, 16MB flash, 8MB PSRAM, production series
#board = obp60_s3_light_n8r8 #ESP32-S3 N8R8, 8MB flash, 8MB PSRAM, OBP60 clone
#board_build.partitions = default_8MB.csv #ESP32-S3 N8, 8MB flash
board_build.partitions = default_16MB.csv #ESP32-S3 N16, 16MB flash
framework = arduino
lib_deps =
${basedeps.lib_deps}
@ -40,22 +40,22 @@ lib_deps =
build_flags=
#https://thingpulse.com/usb-settings-for-logging-with-the-esp32-s3-in-platformio/?srsltid=AfmBOopGskbkr4GoeVkNlFaZXe_zXkLceKF6Rn-tmoXABCeAR2vWsdHL
# -D ARDUINO_USB_MODE=1 #0=OTG (to implement other external devices), 1=CDC (is a serial device)
-D ARDUINO_USB_CDC_ON_BOOT=0 #Serial output via RX/TX
# -D ARDUINO_USB_CDC_ON_BOOT=1 #0=JTAG, 1=CDC (serial device)
# -D CORE_DEBUG_LEVEL=1 #Debug level for CPU core via CDC (seral device)
# -D TIME=$UNIX_TIME #Set PC time for RTC (only settable via VSC)
-D DISABLE_DIAGNOSTIC_OUTPUT #Disable diagnostic output for GxEPD2 lib
-D BOARD_OBP60S3 #Board OBP60 V2.1 with ESP32S3
# -D HARDWARE_V20 #OBP60 hardware revision V2.0
# -D HARDWARE_V21 #OBP60 hardware revision V2.1
-D HARDWARE_LIGHT #OBP60 hardware clone
-D HARDWARE_V21 #OBP60 hardware revision V2.1
# -D HARDWARE_LIGHT #OBP60 hardware clone
# -D DISPLAY_GDEW042T2 #old E-Ink display from Waveshare, R10 0.47 ohm
-D DISPLAY_GDEY042T81 #new E-Ink display from Waveshare, R10 2.2 ohm
# -D DISPLAY_GYE042A87 #alternativ E-Ink display from Genyo Optical, R10 2.2 ohm
# -D DISPLAY_SE0420NQ04 #alternativ E-Ink display from SID Technology, R10 2.2 ohm
${env.build_flags}
#CONFIG_ESP_TASK_WDT_TIMEOUT_S = 10 #Task Watchdog timeout period (seconds) [1...60] 5 default
#upload_port = /dev/ttyACM0 #OBP60 original
upload_port = /dev/ttyUSB0 #OBP60 clone
upload_port = /dev/ttyACM0 #OBP60 original
#upload_port = /dev/ttyUSB0 #OBP60 clone
upload_protocol = esptool #firmware upload via USB OTG seriell, by first upload need to set the ESP32-S3 in the upload mode with shortcut GND to Pin27
upload_speed = 230400
monitor_speed = 115200