thooge/esp32-nmea2000-obp60
1
0
Fork 0
mirror of https://github.com/thooge/esp32-nmea2000-obp60.git synced 2025-12-15 23:13:07 +01:00
Code Releases Activity

Add CPU speed for config. Modify display refresh with temp compensation

Browse Source
This commit is contained in:
norbert-walter
2024-09-26 17:57:43 +02:00
parent bb8ff01e41
commit 91b0c25dd6
4 changed files with 435 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
lib/obp60task/platformio.ini
View File

@@ -5,7 +5,6 @@
default_envs = obp60_s3
[env:obp60_s3]
platform = espressif32@6.8.1
-D board_build.f_cpu = 160000000L
board_build.variants_dir = variants
#board = obp60_s3_n8 #ESP32-S3 N8, 8MB flash, no PSRAM
#board = obp60_s3_n16 #ESP32-S3 N16,16MB flash, no PSRAM, zero series
@@ -36,15 +35,20 @@ lib_deps =
milesburton/DallasTemperature@3.11.0
signetica/SunRise@2.0.2
build_flags=
#-DTIME=$UNIX_TIME
-D BOARD_OBP60S3
# -D DISPLAY_GDEW042T2 #old E-Ink display from Waveshare, R10 0.47 ohm
-D DISPLAY_GDEY042T81 #new E-Ink display from Waveshare, R10 2.2 ohm
# -D DISPLAY_GYE042A87 #alternativ E-Ink display from Genyo Optical, R10 2.2 ohm
# -D DISPLAY_SE0420NQ04 #alternativ E-Ink display from SID Technology, R10 2.2 ohm
#https://thingpulse.com/usb-settings-for-logging-with-the-esp32-s3-in-platformio/?srsltid=AfmBOopGskbkr4GoeVkNlFaZXe_zXkLceKF6Rn-tmoXABCeAR2vWsdHL
-D ARDUINO_USB_MODE=1 #0=OTG (to implement other external devices), 1=CDC (is a serial device)
-D ARDUINO_USB_CDC_ON_BOOT=1 #0=JTAG, 1=CDC (serial device)
-D CORE_DEBUG_LEVEL=1 #Debug level for CPU core via CDC (seral device)
-D TIME=$UNIX_TIME #Set PC time for RTC (only settable via VSC)
-D DISABLE_DIAGNOSTIC_OUTPUT #Disable diagnostic output for GxEPD2 lib
-D BOARD_OBP60S3 #Board OBP60 V2.1 with ESP32S3
# -D DISPLAY_GDEW042T2 #old E-Ink display from Waveshare, R10 0.47 ohm
-D DISPLAY_GDEY042T81 #new E-Ink display from Waveshare, R10 2.2 ohm
# -D DISPLAY_GYE042A87 #alternativ E-Ink display from Genyo Optical, R10 2.2 ohm
# -D DISPLAY_SE0420NQ04 #alternativ E-Ink display from SID Technology, R10 2.2 ohm
${env.build_flags}
#CONFIG_ESP_TASK_WDT_TIMEOUT_S = 10 #Task Watchdog timeout period (seconds) [1...60] 5 default
upload_port = /dev/ttyACM0
upload_protocol = esptool #firmware upload via USB OTG seriell, by first upload need to set the ESP32-S3 in the upload mode with shortcut GND to Pin27
upload_protocol = esptool #firmware upload via USB OTG seriell, by first upload need to set the ESP32-S3 in the upload mode with shortcut GND to Pin27
upload_speed = 230400
monitor_speed = 115200