Implement Min Power mode

lib/obp60task/OBP60Extensions.cpp

@@ -70,8 +70,6 @@ LedTaskData *ledTaskData=nullptr;
 
 void hardwareInit()
 {
-    // Init power rail 5.0V
-    setPortPin(OBP_POWER_50, true);
     Wire.begin();
     // Init PCF8574 digital outputs
     Wire.setClock(I2C_SPEED);       // Set I2C clock on 10 kHz

lib/obp60task/OBP60Hardware.h

@@ -57,7 +57,7 @@
     #define TONE3 3500          // 3500Hz
     #define TONE4 4000          // 4000Hz
     // Analog Input
-    #define OBP_ANALOG0 4       // Voltage power supplay
+    #define OBP_ANALOG0 4       // Analog input for voltage power supplay
     #define MIN_VOLTAGE 10.0    // Min voltage for under voltage detection (then goto deep sleep)
     #define POWER_FAIL_TIME 2   // in [ms] Accept min voltage until 2 x 1ms (for under voltage gaps by engine start)
     // Touch buttons

lib/obp60task/obp60task.cpp

@@ -45,6 +45,16 @@ void OBP60Init(GwApi *api){
     // Init hardware
     hardwareInit();
 
+    // Init power rail 5.0V
+    String powermode = api->getConfig()->getConfigItem(api->getConfig()->powerMode,true)->asString();
+    api->getLogger()->logDebug(GwLog::DEBUG,"Power Mode is: %s", powermode.c_str());
+    if(powermode == "Max Power" || powermode == "Only 5.0V"){
+        setPortPin(OBP_POWER_50, true); // Power on 5.0V rail
+    }
+    else{
+        setPortPin(OBP_POWER_50, false); // Power off 5.0V rail
+    }
+
     // Settings for e-paper display
     String fastrefresh = api->getConfig()->getConfigItem(api->getConfig()->fastRefresh,true)->asString();
     api->getLogger()->logDebug(GwLog::DEBUG,"Fast Refresh Mode is: %s", fastrefresh.c_str());
@@ -312,8 +322,12 @@ void OBP60Task(GwApi *api){
     int pixelcolor = GxEPD_BLACK;
     int bgcolor = GxEPD_WHITE;
 
-    getdisplay().init(115200);   // Init for nolrmal displays
- //   getdisplay().init(115200, true, 2, false);   // Use this for Waveshare boards with "clever" reset circuit, 2ms reset pulse
+    #ifdef DISPLAY_GDEY042T81
+        getdisplay().init(115200, true, 2, false);  // Use this for Waveshare boards with "clever" reset circuit, 2ms reset pulse
+    #else
+        getdisplay().init(115200);                  // Init for normal displays
+    #endif
+
     getdisplay().setRotation(0);                 // Set display orientation (horizontal)
     if(displaycolor == "Normal"){
         textcolor = GxEPD_BLACK;

lib/obp60task/platformio.ini

@@ -42,6 +42,8 @@ build_flags=
     -D TIME=$UNIX_TIME              #Set PC time for RTC (only settable via VSC)
     -D DISABLE_DIAGNOSTIC_OUTPUT    #Disable diagnostic output for GxEPD2 lib
     -D BOARD_OBP60S3                #Board OBP60 V2.1 with ESP32S3
+#    -D HARDWARE_V20                 #Hardware revision V2.0
+    -D HARDWARE_V21                 #Hardware revision V2.1
 #    -D DISPLAY_GDEW042T2            #old E-Ink display from Waveshare, R10 0.47 ohm
     -D DISPLAY_GDEY042T81           #new E-Ink display from Waveshare, R10 2.2 ohm
 #    -D DISPLAY_GYE042A87            #alternativ E-Ink display from Genyo Optical, R10 2.2 ohm