thooge/esp32-nmea2000-obp60
1
0
Fork 0
mirror of https://github.com/thooge/esp32-nmea2000-obp60.git synced 2026-03-28 18:06:37 +01:00
Code Releases Activity

Integrate many changes from master

Browse Source
This commit is contained in:
Thomas Hooge
2026-03-18 13:29:57 +01:00
parent b2e67880d3
commit caf833e6ac
107 changed files with 8565 additions and 2688 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
lib/obp60task/platformio.ini
View File

@@ -15,6 +15,8 @@ board_build.variants_dir = variants
board = obp60_s3_n16r8 #ESP32-S3 N16R8, 16MB flash, 8MB PSRAM, production series
#board_build.partitions = default_8MB.csv #ESP32-S3 N8, 8MB flash
board_build.partitions = default_16MB.csv #ESP32-S3 N16, 16MB flash
custom_config = lib/obp60task/config_obp60.json
custom_script = lib/obp60task/extra_task.py
board_name = OBP60
framework = arduino
lib_deps =
@@ -22,6 +24,8 @@ lib_deps =
Wire
SPI
ESP32time
HTTPClient
WiFiClientSecure
robtillaart/PCF8574@0.3.9
adafruit/Adafruit Unified Sensor @ 1.1.13
blemasle/MCP23017@2.0.0
@@ -51,8 +55,6 @@ build_flags=
# -D DISPLAY_GYE042A87 #alternativ E-Ink display from Genyo Optical, R10 2.2 ohm - medium
# -D DISPLAY_SE0420NQ04 #alternativ E-Ink display from SID Technology, R10 2.2 ohm - bad (burn in effects)
# -D DISPLAY_ZJY400300-042CAAMFGN #alternativ E-Ink display from ZZE Technology, R10 2.2 ohm - very good
# -D ENABLE_TRUEWIND # calculate true wind data (default off)
# -D ENABLE_CALIBRATION # boat data calibration (default off)
${env.build_flags}
#CONFIG_ESP_TASK_WDT_TIMEOUT_S = 10 #Task Watchdog timeout period (seconds) [1...60] 5 default
upload_port = /dev/ttyACM0 #OBP60 download via USB-C direct
@@ -64,14 +66,17 @@ monitor_speed = 115200
board_build.variants_dir = variants
board = obp40_s3_n8r8 #ESP32-S3 N8R8, 8MB flash, 8MB PSRAM, OBP60 clone (CrowPanel 4.2)
board_build.partitions = default_8MB.csv #ESP32-S3 N8, 8MB flash
custom_config = lib/obp60task/config_obp40.json
custom_script = lib/obp60task/extra_task.py
board_name = OBP40
custom_config = config_obp40.json
framework = arduino
lib_deps =
${basedeps.lib_deps}
Wire
SPI
ESP32time
HTTPClient
WiFiClientSecure
robtillaart/PCF8574@0.3.9
adafruit/Adafruit Unified Sensor @ 1.1.13
blemasle/MCP23017@2.0.0
@@ -96,8 +101,6 @@ build_flags=
#-D DISPLAY_ZJY400300-042CAAMFGN #alternativ E-Ink display from ZZE Technology, R10 2.2 ohm - very good
# -D LIPO_ACCU_1200 #Hardware extension, LiPo accu 3,7V 1200mAh
# -D VOLTAGE_SENSOR #Hardware extension, LiPo voltage sensor with two resistors
# -D ENABLE_TRUEWIND # calculate true wind data (default off)
# -D ENABLE_CALIBRATION # boat data calibration (default off)
${env.build_flags}
upload_port = /dev/ttyUSB0 #OBP40 download via external USB/Serail converter
upload_protocol = esptool #firmware upload via USB OTG seriell, by first upload need to set the ESP32-S3 in the upload mode with shortcut GND to Pin27