Merge branch 'master' into obp40

Add display library version info to page system

extra_script.py.new

@@ -520,19 +520,23 @@ prebuild(env)
 board="PLATFORM_BOARD_%s"%env["BOARD"].replace("-","_").upper()
 print("Board=#%s#"%board)
 print("BuildFlags=%s"%(" ".join(env["BUILD_FLAGS"])))
-
-epdtype = "unknown"
-pcbvers = "unknown"
-for x in env["BUILD_FLAGS"]:
-    if x.startswith("-D HARDWARE_"):
-        pcbvers = x.split('_')[1]
-    if x.startswith("-D DISPLAY_"):
-        epdtype = x.split('_')[1]
-
 env.Append(
     LINKFLAGS=[ "-u", "custom_app_desc" ],
-    CPPDEFINES=[(board,"1"), ("BOARD", env["BOARD"]), ("EPDTYPE", epdtype),
-                ("PCBVERS", pcbvers)]
+    CPPDEFINES=[(board,"1")]
 )
 #script does not run on clean yet - maybe in the future
 env.AddPostAction("clean",cleangenerated)
+
+#look for extra task scripts and include them here
+for taskdir in userTaskDirs:
+    script = os.path.join(taskdir, "extra_task.py")
+    if os.path.isfile(script):
+        taskname = os.path.basename(os.path.normpath(taskdir))
+        print("#extra task script for '{}'".format(taskname))
+        with open(script) as fh:
+            try:
+                code = compile(fh.read(), taskname, 'exec')
+            except SyntaxError:
+                print("#ERROR: script does not compile")
+                continue
+            exec(code)

lib/obp60task/OBP60Extensions.cpp

@@ -64,6 +64,12 @@ PCF8574 pcf8574_Out(PCF8574_I2C_ADDR1); // First digital output modul PCF8574 fr
 Adafruit_FRAM_I2C fram;
 bool hasFRAM = false;
 
+// SD Card
+#ifdef BOARD_OBP40S3
+sdmmc_card_t *sdcard;
+bool hasSDCard;
+#endif
+
 // Global vars
 bool blinkingLED = false;       // Enable / disable blinking flash LED
 bool statusLED = false;         // Actual status of flash LED on/off
@@ -78,6 +84,9 @@ LedTaskData *ledTaskData=nullptr;
 
 void hardwareInit(GwApi *api)
 {
+    GwLog *logger=api->getLogger();
+    GwConfigHandler *config=api->getConfig();
+
     Wire.begin();
     // Init PCF8574 digital outputs
     Wire.setClock(I2C_SPEED);       // Set I2C clock on 10 kHz
@@ -87,7 +96,7 @@ void hardwareInit(GwApi *api)
     fram = Adafruit_FRAM_I2C();
     if (esp_reset_reason() ==  ESP_RST_POWERON) {
         // help initialize FRAM
-        api->getLogger()->logDebug(GwLog::LOG,"Delaying I2C init for 250ms due to cold boot");
+        LOG_DEBUG(GwLog::LOG,"Delaying I2C init for 250ms due to cold boot");
         delay(250);
     }
     // FRAM (e.g. MB85RC256V)
@@ -99,12 +108,53 @@ void hardwareInit(GwApi *api)
         // Boot counter
         uint8_t framcounter = fram.read(0x0000);
         fram.write(0x0000, framcounter+1);
-        api->getLogger()->logDebug(GwLog::LOG,"FRAM detected: 0x%04x/0x%04x (counter=%d)", manufacturerID, productID, framcounter);
+        LOG_DEBUG(GwLog::LOG,"FRAM detected: 0x%04x/0x%04x (counter=%d)", manufacturerID, productID, framcounter);
     }
     else {
         hasFRAM = false;
-        api->getLogger()->logDebug(GwLog::LOG,"NO FRAM detected");
+        LOG_DEBUG(GwLog::LOG,"NO FRAM detected");
     }
+    // SD Card
+    hasSDCard = false;
+#ifdef BOARD_OBP40S3
+    if (config->getBool(config->useSDCard)) {
+        esp_err_t ret;
+        sdmmc_host_t host = SDSPI_HOST_DEFAULT();
+        host.slot = SPI3_HOST;
+        spi_bus_config_t bus_cfg = {
+            .mosi_io_num = SD_SPI_MOSI,
+            .miso_io_num = SD_SPI_MISO,
+            .sclk_io_num = SD_SPI_CLK,
+            .quadwp_io_num = -1,
+            .quadhd_io_num = -1,
+            .max_transfer_sz = 4000,
+        };
+        ret = spi_bus_initialize((spi_host_device_t) host.slot, &bus_cfg, SDSPI_DEFAULT_DMA);
+        if (ret != ESP_OK) {
+            LOG_DEBUG(GwLog::ERROR,"Failed to initialize SPI bus for SD card");
+        } else {
+            sdspi_device_config_t slot_config = SDSPI_DEVICE_CONFIG_DEFAULT();
+            slot_config.gpio_cs = SD_SPI_CS;
+            slot_config.host_id = (spi_host_device_t) host.slot;
+            esp_vfs_fat_sdmmc_mount_config_t mount_config = {
+                .format_if_mount_failed = false,
+                .max_files = 5,
+                .allocation_unit_size = 16 * 1024
+            };
+            ret = esp_vfs_fat_sdspi_mount(MOUNT_POINT, &host, &slot_config, &mount_config, &sdcard);
+            if (ret != ESP_OK) {
+                if (ret == ESP_FAIL) {
+                    LOG_DEBUG(GwLog::ERROR,"Failed to mount SD card filesystem");
+                } else {
+                    LOG_DEBUG(GwLog::ERROR,"Failed to initialize SD card");
+                }
+            } else {
+                LOG_DEBUG(GwLog::ERROR,"SD card filesystem mounted");
+                hasSDCard = true;
+            }
+        }
+    }
+#endif
 }
 
 void setPortPin(uint pin, bool value){

lib/obp60task/OBP60Extensions.h

@@ -7,6 +7,12 @@
 #include <GxEPD2_BW.h>                  // E-paper lib V2
 #include <Adafruit_FRAM_I2C.h>          // I2C FRAM
 
+#ifdef BOARD_OBP40S3
+#include "esp_vfs_fat.h"
+#include "sdmmc_cmd.h"
+#define MOUNT_POINT "/sdcard"
+#endif
+
 // FRAM address reservations 32kB: 0x0000 - 0x7FFF
 // 0x0000 - 0x03ff: single variables
 #define FRAM_PAGE_NO 0x0002
@@ -24,6 +30,10 @@
 
 extern Adafruit_FRAM_I2C fram;
 extern bool hasFRAM;
+#ifdef BOARD_OBP40S3
+extern sdmmc_card_t *sdcard;
+extern bool hasSDCard;
+#endif
 
 // Fonts declarations for display (#includes see OBP60Extensions.cpp)
 extern const GFXfont DSEG7Classic_BoldItalic16pt7b;

lib/obp60task/OBP60Formater.cpp

@@ -37,6 +37,18 @@ String formatTime(char fmttype, uint8_t hour, uint8_t minute, uint8_t second) {
     return String(buffer);
 }
 
+String formatLatitude(double lat) {
+    float degree = abs(int(lat));
+    float minute = abs((lat - int(lat)) * 60);
+    return String(degree, 0) + "\x90 " + String(minute, 4) + "' " + ((lat > 0) ? "N" : "S");
+}
+
+String formatLongitude(double lon) {
+    float degree = abs(int(lon));
+    float minute = abs((lon - int(lon)) * 60);
+    return String(degree, 0) + "\x90 " + String(minute, 4) + "' " + ((lon > 0) ? "E" : "W");
+}
+
 FormatedData formatValue(GwApi::BoatValue *value, CommonData &commondata){
     GwLog *logger = commondata.logger;
     FormatedData result;

lib/obp60task/OBP60Hardware.h

@@ -120,10 +120,10 @@
     #define SHOW_TIME 6000        // Show time in [ms] for logo and WiFi QR code
     #define FULL_REFRESH_TIME 600 // Refresh cycle time in [s][600...3600] for full display update (very important healcy function)
     // SPI SD-Card
-    #define SD_SPI_CS 10
-    #define SD_SPI_MOSI 40
-    #define SD_SPI_CLK 39
-    #define SD_SPI_MISO 13
+    #define SD_SPI_CS GPIO_NUM_10
+    #define SD_SPI_MOSI GPIO_NUM_40
+    #define SD_SPI_CLK GPIO_NUM_39
+    #define SD_SPI_MISO GPIO_NUM_13
 
     // GPS (NEO-6M, NEO-M8N, ATGM336H)
     #define OBP_GPS_RX 19

lib/obp60task/OBPSensorTask.cpp

@@ -498,14 +498,18 @@ void sensorTask(void *param){
         // Send supply voltage value all 1s
         if(millis() > starttime5 + 1000 && String(powsensor1) == "off"){
             starttime5 = millis();
-            float rawVoltage = 0;
-            #if defined(BOARD_OBP40S3) && defined(VOLTAGE_SENSOR)
+            float rawVoltage = 0;       // Default value
+            #ifdef BOARD_OBP40S3
+            sensors.batteryVoltage = 0; // If no sensor then zero voltage
+            #endif
+            #if defined(BOARD_OBP40S3)  && defined(VOLTAGE_SENSOR)
             rawVoltage = (float(analogRead(OBP_ANALOG0)) * 3.3 / 4096 + 0.53) * 2;   // Vin = 1/2 for OBP40
+            sensors.batteryVoltage = rawVoltage * vslope + voffset; // Calibration
             #endif
             #ifdef BOARD_OBP60S3
-            rawVoltage = (float(analogRead(OBP_ANALOG0)) * 3.3 / 4096 + 0.17) * 20;   // Vin = 1/20 for OBP60    
+            rawVoltage = (float(analogRead(OBP_ANALOG0)) * 3.3 / 4096 + 0.17) * 20;   // Vin = 1/20 for OBP60
+            sensors.batteryVoltage = rawVoltage * vslope + voffset; // Calibration  
             #endif
-            sensors.batteryVoltage = rawVoltage * vslope + voffset; // Calibration
             // Save new data in average array
             batV.reading(int(sensors.batteryVoltage * 100));
             // Calculate the average values for different time lines from integer values

lib/obp60task/PageSystem.cpp

@@ -6,17 +6,13 @@
 #include <esp32/clk.h>
 #include "qrcode.h"
 
-#ifdef BOARD_OBP40S3
-#include <SD.h>
-#include <FS.h>
-#endif
-
 #define STRINGIZE_IMPL(x) #x
 #define STRINGIZE(x) STRINGIZE_IMPL(x)
 #define VERSINFO STRINGIZE(GWDEVVERSION)
 #define BOARDINFO STRINGIZE(BOARD)
 #define PCBINFO STRINGIZE(PCBVERS)
 #define DISPLAYINFO STRINGIZE(EPDTYPE)
+#define GXEPD2INFO STRINGIZE(GXEPD2VERS)
 
 /*
  * Special system page, called directly with fast key sequence 5,4
@@ -43,6 +39,8 @@ String batt_sensor;
 String solar_sensor;
 String gen_sensor;
 String rot_sensor;
+double homelat;
+double homelon;
 
 char mode = 'N'; // (N)ormal, (S)ettings, (D)evice list, (C)ard
 
@@ -69,6 +67,8 @@ public:
         solar_sensor = common.config->getString(common.config->usePowSensor2);
         gen_sensor = common.config->getString(common.config->usePowSensor3);
         rot_sensor = common.config->getString(common.config->useRotSensor);
+        homelat = common.config->getString(common.config->homeLAT).toDouble();
+        homelon = common.config->getString(common.config->homeLON).toDouble();
     }
 
     virtual void setupKeys(){
@@ -203,19 +203,21 @@ public:
 
             getdisplay().setCursor(8, 95);
             getdisplay().print("Firmware version: ");
-            getdisplay().setCursor(160, 95);
+            getdisplay().setCursor(150, 95);
             getdisplay().print(VERSINFO);
 
             getdisplay().setCursor(8, 113);
             getdisplay().print("Board version: ");
-            getdisplay().setCursor(160, 113);
+            getdisplay().setCursor(150, 113);
             getdisplay().print(BOARDINFO);
             getdisplay().print(String(" HW ") + String(PCBINFO));
 
             getdisplay().setCursor(8, 131);
             getdisplay().print("Display version: ");
-            getdisplay().setCursor(160, 131);
+            getdisplay().setCursor(150, 131);
             getdisplay().print(DISPLAYINFO);
+            getdisplay().print("; GxEPD2 v");
+            getdisplay().print(GXEPD2INFO);
 
             getdisplay().setCursor(8, 265);
 #ifdef BOARD_OBP60S3
@@ -250,12 +252,7 @@ public:
             getdisplay().setCursor(8, y0 + 48);
             getdisplay().print("SD-Card:");
             getdisplay().setCursor(90, y0 + 48);
-            if (sdcard) {
-                uint64_t cardsize = SD.cardSize() / (1024 * 1024);
-                getdisplay().print(String(cardsize) + String(" MB"));
-            } else {
-                getdisplay().print("off");
-            }
+            getdisplay().print(hasSDcard ? "ok" : "no");
 #endif
 
             // CPU speed config / active
@@ -295,34 +292,44 @@ public:
             // left column
             getdisplay().setCursor(x0, y0);
             getdisplay().print("Simulation:");
-            getdisplay().setCursor(140, y0);
+            getdisplay().setCursor(120, y0);
             getdisplay().print(simulation ? "on" : "off");
 
             getdisplay().setCursor(x0, y0 + 16);
             getdisplay().print("Environment:");
-            getdisplay().setCursor(140, y0 + 16);
+            getdisplay().setCursor(120, y0 + 16);
             getdisplay().print(env_module);
 
             getdisplay().setCursor(x0, y0 + 32);
             getdisplay().print("Buzzer:");
-            getdisplay().setCursor(140, y0 + 32);
+            getdisplay().setCursor(120, y0 + 32);
             getdisplay().print(buzzer_mode);
 
             getdisplay().setCursor(x0, y0 + 64);
             getdisplay().print("GPS:");
-            getdisplay().setCursor(140, y0 + 64);
+            getdisplay().setCursor(120, y0 + 64);
             getdisplay().print(gps_module);
 
             getdisplay().setCursor(x0, y0 + 80);
             getdisplay().print("RTC:");
-            getdisplay().setCursor(140, y0 + 80);
+            getdisplay().setCursor(120, y0 + 80);
             getdisplay().print(rtc_module);
 
             getdisplay().setCursor(x0, y0 + 96);
             getdisplay().print("Wifi:");
-            getdisplay().setCursor(140, y0 + 96);
+            getdisplay().setCursor(120, y0 + 96);
             getdisplay().print(commonData->status.wifiApOn ? "on" : "off");
 
+            // Home location
+            getdisplay().setCursor(x0, y0 + 128);
+            getdisplay().print("Home Lat.:");
+            getdisplay().setCursor(120, y0 + 128);
+            getdisplay().print(formatLatitude(homelat));
+            getdisplay().setCursor(x0, y0 + 144);
+            getdisplay().print("Home Lon.:");
+            getdisplay().setCursor(120, y0 + 144);
+            getdisplay().print(formatLongitude(homelon));
+
             // right column
             getdisplay().setCursor(202, y0);
             getdisplay().print("Batt. sensor:");
@@ -356,7 +363,6 @@ public:
             getdisplay().setCursor(x0, y0);
             getdisplay().print("Work in progress...");
 
-
         } else {
             // NMEA2000 device list
             getdisplay().setFont(&Ubuntu_Bold12pt8b);

lib/obp60task/PageVoltage.cpp

@@ -187,7 +187,6 @@ public:
         }
         
         // Logging voltage value
-        if (raw == 0) return;
         LOG_DEBUG(GwLog::LOG,"Drawing at PageVoltage, Type:%s %s:=%f", batType, name1.c_str(), raw);
 
         // Draw page

lib/obp60task/Pagedata.h

@@ -168,6 +168,8 @@ class PageStruct{
 // Standard format functions without overhead
 String formatDate(String fmttype, uint16_t year, uint8_t month, uint8_t day);
 String formatTime(char fmttype, uint8_t hour, uint8_t minute, uint8_t second);
+String formatLatitude(double lat);
+String formatLongitude(double lon);
 
 // Structure for formatted boat values
 typedef struct{

lib/obp60task/debugging.txt

@@ -0,0 +1,6 @@
+Debugging tool
+##############
+
+log.txt = text file with error messages from terminal console
+
+tools/decoder.py -p ESP32S3 -t ~/.platformio/packages/toolchain-xtensa-esp32s3/ -e .pio/build/obp60_s3/firmware.elf log.txt

lib/obp60task/extra_task.py

@@ -0,0 +1,30 @@
+# PlatformIO extra script for obp60task
+
+epdtype = "unknown"
+pcbvers = "unknown"
+for x in env["BUILD_FLAGS"]:
+    if x.startswith("-D HARDWARE_"):
+        pcbvers = x.split('_')[1]
+    if x.startswith("-D DISPLAY_"):
+        epdtype = x.split('_')[1]
+
+propfilename = os.path.join(env["PROJECT_LIBDEPS_DIR"], env["PIOENV"], "GxEPD2/library.properties")
+properties = {}
+with open(propfilename, 'r') as file:
+    for line in file:
+        match = re.match(r'^([^=]+)=(.*)$', line)
+        if match:
+            key = match.group(1).strip()
+            value = match.group(2).strip()
+            properties[key] = value
+
+gxepd2vers = "unknown"
+try:
+    if properties["name"] == "GxEPD2":
+        gxepd2vers = properties["version"]
+except:
+    pass
+
+env["CPPDEFINES"].extend([("BOARD", env["BOARD"]), ("EPDTYPE", epdtype), ("PCBVERS", pcbvers), ("GXEPD2VERS", gxepd2vers)])
+
+print("added hardware info to CPPDEFINES")

lib/obp60task/obp60task.cpp

@@ -79,8 +79,8 @@ void OBP60Init(GwApi *api){
     }
 
     #ifdef BOARD_OBP40S3
-    bool sdcard = config->getBool(config->useSDCard);
-    if (sdcard) {
+    // TODO migrate to new code see OBP60Extensions.cpp
+    if (config->getBool(config->useSDCard)) {
         SPIClass SD_SPI = SPIClass(HSPI);
         SD_SPI.begin(SD_SPI_CLK, SD_SPI_MISO, SD_SPI_MOSI);
         if (SD.begin(SD_SPI_CS, SD_SPI, 80000000)) {
@@ -99,6 +99,7 @@ void OBP60Init(GwApi *api){
             }
             uint64_t cardSize = SD.cardSize() / (1024 * 1024);
             LOG_DEBUG(GwLog::LOG,"SD card type %s of size %d MB detected", sdtype, cardSize);
+            SD_SPI.end();
         }
     }
 
@@ -382,6 +383,7 @@ void OBP60Task(GwApi *api){
 #ifdef HARDWARE_V21
     startLedTask(api);
 #endif
+
     PageList allPages;
     registerAllPages(allPages);
     CommonData commonData;
@@ -711,7 +713,7 @@ void OBP60Task(GwApi *api){
                     }
                   
                     // #9 or #10 Refresh display after a new page after 4s waiting time and if refresh is disabled
-                    if(refreshmode == true && (keyboardMessage == 9 || keyboardMessage == 10)){
+                    if(refreshmode == true && (keyboardMessage == 9 || keyboardMessage == 10 || keyboardMessage == 4 || keyboardMessage == 3)){
                         starttime4 = millis();
                         starttime2 = millis();      // Reset the timer for full display update
                         delayedDisplayUpdate = true;