Fix for OBP40 in page system and deepSleep

Deep sleep for OBP60 and small fix for BMP180

lib/obp60task/OBP60Extensions.cpp

@@ -70,6 +70,9 @@ bool statusBacklightLED = false;// Actual status of flash LED on/off
 
 int uvDuration = 0;             // Under voltage duration in n x 100ms
 
+RTC_DATA_ATTR uint8_t RTC_lastpage; // Remember last page while deep sleeping
+
+
 LedTaskData *ledTaskData=nullptr;
 
 void hardwareInit(GwApi *api)
@@ -118,6 +121,35 @@ void startLedTask(GwApi *api){
     createSpiLedTask(ledTaskData);
 }
 
+uint8_t getLastPage() {
+    return RTC_lastpage;
+}
+
+#ifdef BOARD_OBP60S3
+void deepSleep(CommonData &common){
+    RTC_lastpage = common.data.actpage - 1;
+    // Switch off all power lines
+    setPortPin(OBP_BACKLIGHT_LED, false);   // Backlight Off
+    setFlashLED(false);                     // Flash LED Off
+    buzzer(TONE4, 20);                      // Buzzer tone 4kHz 20ms
+    // Shutdown EInk display
+    getdisplay().setFullWindow();               // Set full Refresh
+    getdisplay().fillScreen(common.bgcolor);    // Clear screen
+    getdisplay().setTextColor(common.fgcolor);
+    getdisplay().setFont(&Ubuntu_Bold20pt7b);
+    getdisplay().setCursor(85, 150);
+    getdisplay().print("Sleep Mode");
+    getdisplay().setFont(&Ubuntu_Bold8pt7b);
+    getdisplay().setCursor(65, 175);
+    getdisplay().print("For wakeup press key and wait 5s");
+    getdisplay().nextPage();                // Update display contents
+    getdisplay().powerOff();                // Display power off
+    setPortPin(OBP_POWER_50, false);        // Power off ePaper display
+    // Stop system
+    esp_deep_sleep_start();             // Deep Sleep with weakup via GPIO pin
+}
+#endif
+
 // Valid colors see hue
 Color colorMapping(const String &colorString){
     Color color = COLOR_RED;

lib/obp60task/OBP60Extensions.h

@@ -64,6 +64,12 @@ Point rotatePoint(const Point& origin, const Point& p, double angle);
 std::vector<Point> rotatePoints(const Point& origin, const std::vector<Point>& pts, double angle);
 void fillPoly4(const std::vector<Point>& p4, uint16_t color);
 
+#ifdef BOARD_OBP60S3
+void deepSleep(CommonData &common);
+#endif
+
+uint8_t getLastPage();
+
 void hardwareInit(GwApi *api);
 
 void setPortPin(uint pin, bool value);          // Set port pin for extension port

lib/obp60task/PageBME280.cpp

@@ -48,7 +48,7 @@ class PageBME280 : public Page
             value1 = 23.0 + float(random(0, 10)) / 10.0;
         }
         // Display data when sensor activated
-        if((String(useenvsensor) == "BME280") or (String(useenvsensor) == "BMP280")){
+        if((useenvsensor == "BME280") or (useenvsensor == "BMP280") or (useenvsensor == "BMP180")){
             svalue1 = String(value1, 1);                // Formatted value as string including unit conversion and switching decimal places
         }
         else{
@@ -66,7 +66,7 @@ class PageBME280 : public Page
             value2 = 43 + float(random(0, 4));
         }
         // Display data when sensor activated
-        if(String(useenvsensor) == "BME280"){
+        if(useenvsensor == "BME280"){
             svalue2 = String(value2, 0);                // Formatted value as string including unit conversion and switching decimal places
         }
         else{
@@ -84,7 +84,7 @@ class PageBME280 : public Page
             value3 = 1006 + float(random(0, 5));
         }
         // Display data when sensor activated
-        if((String(useenvsensor) == "BME280") or (String(useenvsensor) == "BMP280")){
+        if((useenvsensor == "BME280") or (useenvsensor == "BMP280") or (useenvsensor == "BMP180")){
             svalue3 = String(value3 / 100, 1);          // Formatted value as string including unit conversion and switching decimal places
         }
         else{

lib/obp60task/PageSystem.cpp

@@ -48,7 +48,7 @@ public:
         commonData->keydata[0].label = "EXIT";
         commonData->keydata[1].label = "MODE";
         commonData->keydata[2].label = "";
-        commonData->keydata[3].label = "";
+        commonData->keydata[3].label = "RST";
         commonData->keydata[4].label = "STBY";
         commonData->keydata[5].label = "ILUM";
     }
@@ -67,9 +67,19 @@ public:
             return 0;
         }
         // grab cursor keys to disable page navigation
-        if (key == 3 or key == 4) {
+        if (key == 3) {
             return 0;
         }
+        // soft reset
+        if (key == 4) {
+            ESP.restart();
+        }
+#ifdef BOARD_OBP60S3
+        // standby / deep sleep
+        if (key == 5) {
+           deepSleep(*commonData);
+        }
+#endif
         // Code for keylock
         if (key == 11) {
             commonData->keylock = !commonData->keylock;
@@ -133,11 +143,25 @@ public:
             getdisplay().setCursor(120, y0 + 16);
             getdisplay().print(env_module);
 
+            // total RAM free
+            int Heap_free = esp_get_free_heap_size();
+            getdisplay().setCursor(202, y0 + 16);
+            getdisplay().print("Total free:");
+            getdisplay().setCursor(300, y0 + 16);
+            getdisplay().print(String(Heap_free));
+
             getdisplay().setCursor(2, y0 + 32);
             getdisplay().print("Buzzer:");
             getdisplay().setCursor(120, y0 + 32);
             getdisplay().print(buzzer_mode);
 
+            // RAM free for task
+            int RAM_free = uxTaskGetStackHighWaterMark(NULL);
+            getdisplay().setCursor(202, y0 + 32);
+            getdisplay().print("Task free:");
+            getdisplay().setCursor(300, y0 + 32);
+            getdisplay().print(String(RAM_free));
+
             getdisplay().setCursor(2, y0 + 48);
             getdisplay().print("CPU speed:");
             getdisplay().setCursor(120, y0 + 48);
@@ -146,11 +170,6 @@ public:
             int cpu_freq = esp_clk_cpu_freq() / 1000000;
             getdisplay().print(String(cpu_freq));
 
-            getdisplay().setCursor(2, y0 + 64);
-            getdisplay().print("RTC:");
-            getdisplay().setCursor(120, y0 + 64);
-            getdisplay().print(rtc_module);
-
             getdisplay().setCursor(202, y0 + 64);
             getdisplay().print("GPS:");
             getdisplay().setCursor(300, y0 + 64);
@@ -161,6 +180,11 @@ public:
             getdisplay().setCursor(120, y0 + 80);
             getdisplay().print(hasFRAM ? "available" : "not found");
 
+            getdisplay().setCursor(202, y0 + 80);
+            getdisplay().print("RTC:");
+            getdisplay().setCursor(300, y0 + 80);
+            getdisplay().print(rtc_module);
+
             getdisplay().setCursor(2, y0 + 120);
             getdisplay().print("Firmware Version: ");
             getdisplay().print(VERSINFO);

lib/obp60task/PageWhite.cpp

@@ -13,6 +13,7 @@ public:
     PageWhite(CommonData &common){
         commonData = &common;
         common.logger->logDebug(GwLog::LOG,"Instantiate PageWhite");
+        refreshtime = 15000;
     }
 
     virtual int handleKey(int key) {
@@ -53,7 +54,11 @@ public:
         int bgcolor = GxEPD_WHITE;
 
         // Set display in partial refresh mode
-        getdisplay().setPartialWindow(0, 0, getdisplay().width(), getdisplay().height()); // Set partial update
+        if (mode == 'W') {
+            getdisplay().setFullWindow();
+        } else {
+            getdisplay().setPartialWindow(0, 0, getdisplay().width(), getdisplay().height()); // Set partial update
+        }
 
         if (mode == 'L') {
             getdisplay().drawBitmap(0, 0, gImage_Logo_OBP_400x300_sw, getdisplay().width(), getdisplay().height(), commonData->fgcolor);
@@ -62,7 +67,10 @@ public:
         }
 
         // Update display
-        getdisplay().nextPage();    // Partial update (fast)
+        getdisplay().nextPage();
+        if (mode == 'W') {
+            getdisplay().hibernate();
+        }
 
     };
 };

lib/obp60task/Pagedata.h

@@ -100,6 +100,7 @@ class Page{
   protected:
     CommonData *commonData;
   public:
+    int refreshtime = 1000;
     virtual void displayPage(PageData &pageData)=0;
     virtual void displayNew(PageData &pageData){}
     virtual void setupKeys() {

lib/obp60task/obp60task.cpp

@@ -9,7 +9,7 @@
 #include <NMEA0183.h>                   // NMEA0183
 #include <NMEA0183Msg.h>
 #include <NMEA0183Messages.h>
-#include <GxEPD2_BW.h>                  // GxEPD2 lib for black 6 white E-Ink displays
+#include <GxEPD2_BW.h>                  // GxEPD2 lib for b/w E-Ink displays
 #include "OBP60Extensions.h"            // Functions lib for extension board
 #include "OBP60Keypad.h"                // Functions for keypad
 
@@ -117,6 +117,16 @@ void OBP60Init(GwApi *api){
     }
     #endif
 
+    #ifdef BOARD_OBP60S3
+    touchSleepWakeUpEnable(TP1, 45);
+    touchSleepWakeUpEnable(TP2, 45);
+    touchSleepWakeUpEnable(TP3, 45);
+    touchSleepWakeUpEnable(TP4, 45);
+    touchSleepWakeUpEnable(TP5, 45);
+    touchSleepWakeUpEnable(TP6, 45);
+    esp_sleep_enable_touchpad_wakeup();
+    #endif
+
     // Get CPU speed
     int freq = getCpuFrequencyMhz();
     api->getLogger()->logDebug(GwLog::LOG,"CPU speed at boot: %i MHz", freq);
@@ -356,6 +366,8 @@ void deepSleep(CommonData &common){
 }
 #endif
 
+
+
 // OBP60 Task
 //####################################################################################
 void OBP60Task(GwApi *api){
@@ -440,6 +452,18 @@ void OBP60Task(GwApi *api){
     PageStruct pages[MAX_PAGE_NUMBER];
     // Set start page
     int pageNumber = int(api->getConfig()->getConfigItem(api->getConfig()->startPage,true)->asInt()) - 1;
+
+#ifdef BOARD_OBP60S3
+    LOG_DEBUG(GwLog::LOG,"Checking wakeup...");
+    if (esp_sleep_get_wakeup_cause() == ESP_SLEEP_WAKEUP_TOUCHPAD) {
+        LOG_DEBUG(GwLog::LOG,"Wake up by touch pad %d",esp_sleep_get_touchpad_wakeup_status());
+        pageNumber = getLastPage();
+    } else {
+        LOG_DEBUG(GwLog::LOG,"Other wakeup reason");
+    }
+    LOG_DEBUG(GwLog::LOG,"...done");
+#endif
+
     int lastPage=pageNumber;
 
     BoatValueList boatValues; //all the boat values for the api query
@@ -550,8 +574,10 @@ void OBP60Task(GwApi *api){
     //####################################################################################
 
     bool systemPage = false;
+    Page *currentPage;
     while (true){
         delay(100);     // Delay 100ms (loop time)
+        bool keypressed = false;
 
         // Undervoltage detection
         if(uvoltage == true){
@@ -593,8 +619,8 @@ void OBP60Task(GwApi *api){
             int keyboardMessage=0;
             while (xQueueReceive(allParameters.queue,&keyboardMessage,0)){
                 LOG_DEBUG(GwLog::LOG,"new key from keyboard %d",keyboardMessage);
+                keypressed = true;
 
-                Page *currentPage;
                 if (keyboardMessage == 12) {
                     LOG_DEBUG(GwLog::LOG, "Calling system page");
                     systemPage = true; // System page is out of band
@@ -725,9 +751,17 @@ void OBP60Task(GwApi *api){
                 }
             }
             
-            // Refresh display data all 1s
-            if(millis() > starttime3 + 1000){
+            // Refresh display data, default all 1s
+            currentPage = pages[pageNumber].page;
+            int pagetime = 1000;
+            if ((lastPage == pageNumber) and (!keypressed)) {
+                // same page we use page defined time
+                pagetime = currentPage->refreshtime;
+            }
+            if(millis() > starttime3 + pagetime){
+                LOG_DEBUG(GwLog::DEBUG,"Page with refreshtime=%d", pagetime);
                 starttime3 = millis();
+
                 //refresh data from api
                 api->getBoatDataValues(boatValues.numValues,boatValues.allBoatValues);
                 api->getStatus(commonData.status);
@@ -749,7 +783,6 @@ void OBP60Task(GwApi *api){
                     syspage->displayPage(sysparams);
                 }
                 else {
-                    Page *currentPage = pages[pageNumber].page;
                     if (currentPage == NULL){
                         LOG_DEBUG(GwLog::ERROR,"page number %d not found", pageNumber);
                         // Error handling for missing page