Merge branch 'master' into obp40

boards/obp60_s3_light_n8r8.json

@@ -10,7 +10,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_ESP32S3_DEV",
       "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

lib/obp60task/OBP60Keypad.h

@@ -250,7 +250,7 @@ void initKeys(CommonData &commonData) {
     pinMode(MENUE, INPUT);
     pinMode(EXIT, INPUT);
 
-    // Raed pad values
+    // Read pad values
     readSensorpads();
 
     // Detect key
@@ -264,7 +264,7 @@ void initKeys(CommonData &commonData) {
         keystatus = keycode;
         // Copy keycode
         keycodeold = keycode;
-        while(readSensorpads() > 0){} // Wait for pad lesease
+        while(readSensorpads() > 0){} // Wait for pad release
         delay(keydelay);
       }
     }

lib/obp60task/README

@@ -0,0 +1,47 @@
+OBP40 
+=====
+
+Important information: 
+
+***************************************************
+THIS BRANCH IS NOT INTENDED TO MERGE INTO "master"!
+***************************************************
+
+platformio.ini adapted to compile directly
+
+Differences to OBP60
+--------------------
+
+- no GPS
+- no RTC
+- no LEDs
+- no environment sensor
+- no key lock
+- no swipe
+- only 5 keys
+
++ SD card interface
+
+
+GPIO assignments
+----------------
+
+NMEA0183
+  IO9  - RS485 TX
+  IO14 - RS485 RX
+
+NMEA2000/CAN
+  IO15 - CAN TX
+  IO16 - CAN RX
+
+
+Keyboard
+--------
+
+Keycode   Key              Function
+-------- ---------------- -------------------------
+  1       Menu key         Key 1 of OBP60 (left)
+  2       Exit key         Key 2 of OBP60
+  3       Jog-Dial press
+  9       Jog-Dial down    Next page
+ 10       Jog-Dial up      Previous page

lib/obp60task/config.json

@@ -297,7 +297,7 @@
         "name": "useRTC",
         "label": "RTC Modul",
         "type": "list",
-        "default": "DS1388",
+        "default": "off",
         "description": "Use internal RTC module type [off|DS1388]",
         "list": [
             "off",
@@ -312,7 +312,7 @@
         "name": "useGPS",
         "label": "GPS Sensor",
         "type": "list",
-        "default": "ATGM336H",
+        "default": "off",
         "description": "Use internal GPS module type [off|NEO-6M|NEO-M8N|ATGM336H]",
         "list": [
             "off",
@@ -343,7 +343,7 @@
         "name": "useEnvSensor",
         "label": "Env. Sensor",
         "type": "list",
-        "default": "BMP280",
+        "default": "off",
         "description": "Use internal or external environment sensor via I2C bus [off|BME280|BMP280|BMP180|BMP085|HTU21|SHT21]",
         "list": [
             "off",
@@ -573,6 +573,21 @@
             "obp60":"true"
         }
     },
+    {
+        "name": "useSDCard",
+        "label": "SD Card",
+        "type": "boolean",
+        "default": "off",
+        "description": "Use internal SD card interface [off|on]",
+        "list": [
+            "off",
+            "on"
+        ],
+        "category": "OBP60 Hardware",
+        "capabilities": {
+            "obp60":"true"
+        }
+    },
     {
         "name": "powerMode",
         "label": "Power Mode",
@@ -918,7 +933,7 @@
         "name": "page1type",
         "label": "Type",
         "type": "list",
-        "default": "Voltage",
+        "default": "Clock",
         "description": "Type of page for page 1",
         "list": [
             "BME280",
@@ -1178,7 +1193,7 @@
         "name": "page2type",
         "label": "Type",
         "type": "list",
-        "default": "WindRose",
+        "default": "Wind",
         "description": "Type of page for page 2",
         "list": [
             "BME280",
@@ -2676,7 +2691,7 @@
         "name": "page8type",
         "label": "Type",
         "type": "list",
-        "default": "Clock",
+        "default": "Fluid",
         "description": "Type of page for page 8",
         "list": [
             "BME280",

lib/obp60task/obp60task.cpp

@@ -13,6 +13,10 @@
 #include "OBP60Extensions.h"            // Functions lib for extension board
 #include "OBP60Keypad.h"                // Functions for keypad
 
+#include <FS.h> // SD-Card access
+#include <SD.h>
+#include <SPI.h>
+
 // True type character sets includes
 // See OBP60ExtensionPort.cpp
 
@@ -23,8 +27,6 @@
 #include "OBP60QRWiFi.h"                // Functions lib for WiFi QR code
 #include "OBPSensorTask.h"              // Functions lib for sensor data
 
-#include "LedSpiTask.h"
-
 // Global vars
 bool initComplete = false;      // Initialization complete
 int taskRunCounter = 0;         // Task couter for loop section
@@ -33,6 +35,9 @@ int taskRunCounter = 0;         // Task couter for loop section
 //####################################################################################
 void OBP60Init(GwApi *api){
 
+    GwLog *logger = api->getLogger();
+    GwConfigHandler *config = api->getConfig();
+
     // Set a new device name and hidden the original name in the main config
     String devicename = api->getConfig()->getConfigItem(api->getConfig()->deviceName,true)->asString();
     api->getConfig()->setValue(GwConfigDefinitions::systemName, devicename, GwConfigInterface::ConfigType::HIDDEN);
@@ -45,6 +50,31 @@ void OBP60Init(GwApi *api){
     // Init hardware
     hardwareInit(api);
 
+    String sdcard = config->getConfigItem(config->useSDCard, true)->asString();
+    if (sdcard == "on") {
+        setPortPin(OBP_POWER_SD, true); // Power on SD
+        delay(10);
+        SPIClass SD_SPI = SPIClass(HSPI);
+        SD_SPI.begin(SD_SPI_CLK, SD_SPI_MISO, SD_SPI_MOSI);
+        if (SD.begin(SD_SPI_CS, SD_SPI, 80000000)) {
+            String sdtype = "unknown";
+            uint8_t cardType = SD.cardType();
+            switch (cardType) {
+                case CARD_MMC:
+                   sdtype = "MMC";
+                   break;
+                case CARD_SD:
+                   sdtype = "SDSC";
+                   break;
+                case CARD_SDHC:
+                   sdtype = "SDHC";
+                   break;
+            }
+            uint64_t cardSize = SD.cardSize() / (1024 * 1024);
+            LOG_DEBUG(GwLog::LOG,"SD card type %s of size %d MB detected", sdtype, cardSize);
+        }
+    }
+
     // Init power rail 5.0V
     String powermode = api->getConfig()->getConfigItem(api->getConfig()->powerMode,true)->asString();
     api->getLogger()->logDebug(GwLog::DEBUG,"Power Mode is: %s", powermode.c_str());
@@ -288,7 +318,9 @@ void OBP60Task(GwApi *api){
 //    return;
     GwLog *logger=api->getLogger();
     GwConfigHandler *config=api->getConfig();
+#ifdef HARDWARE_V21
     startLedTask(api);
+#endif
     PageList allPages;
     registerAllPages(allPages);
     CommonData commonData;

lib/obp60task/obp60task.h

@@ -19,7 +19,7 @@
         #define ESP32_CAN_TX_PIN 15
         #define ESP32_CAN_RX_PIN 16
         // Bus load in 50mA steps
-        #define N2K_LOAD_LEVEL 2 // 5x50mA = 100mA max bus load with back light on
+        #define N2K_LOAD_LEVEL 2 // 2x50mA = 100mA max bus load
         // RS485 NMEA0183
         #define GWSERIAL_TX 9
         #define GWSERIAL_RX 14

lib/obp60task/platformio.ini

@@ -9,15 +9,16 @@ board_build.variants_dir = variants
 #board = obp60_s3_n8     #ESP32-S3 N8, 8MB flash, no PSRAM
 #board = obp60_s3_n16    #ESP32-S3 N16,16MB flash, no PSRAM, zero series
 #board = obp60_s3_n8r8   #ESP32-S3 N8R8, 8MB flash, 8MB PSRAM
-board = obp60_s3_n16r8  #ESP32-S3 N16R8, 16MB flash, 8MB PSRAM, production series
+#board = obp60_s3_n16r8  #ESP32-S3 N16R8, 16MB flash, 8MB PSRAM, production series
-#board = obp60_s3_light_n8r8   #ESP32-S3 N8R8, 8MB flash, 8MB PSRAM, OBP60 clone
+board = obp60_s3_light_n8r8   #ESP32-S3 N8R8, 8MB flash, 8MB PSRAM, OBP60 clone
-#board_build.partitions = default_8MB.csv #ESP32-S3 N8, 8MB flash
+board_build.partitions = default_8MB.csv #ESP32-S3 N8, 8MB flash
-board_build.partitions = default_16MB.csv #ESP32-S3 N16, 16MB flash
+#board_build.partitions = default_16MB.csv #ESP32-S3 N16, 16MB flash
 framework = arduino
 lib_deps = 
     ${basedeps.lib_deps}
     Wire
     SPI
+    SD
     esphome/AsyncTCP-esphome@2.0.1
     robtillaart/PCF8574@0.3.9
     adafruit/Adafruit Unified Sensor @ 1.1.13
@@ -40,22 +41,22 @@ lib_deps =
 build_flags=
     #https://thingpulse.com/usb-settings-for-logging-with-the-esp32-s3-in-platformio/?srsltid=AfmBOopGskbkr4GoeVkNlFaZXe_zXkLceKF6Rn-tmoXABCeAR2vWsdHL
 #    -D ARDUINO_USB_MODE=1           #0=OTG (to implement other external devices), 1=CDC (is a serial device) 
-#    -D ARDUINO_USB_CDC_ON_BOOT=1    #0=JTAG, 1=CDC (serial device)
+#    -D ARDUINO_USB_CDC_ON_BOOT=0    #0=JTAG, 1=CDC (serial device)
 #    -D CORE_DEBUG_LEVEL=1           #Debug level for CPU core via CDC (seral device)
 #    -D TIME=$UNIX_TIME              #Set PC time for RTC (only settable via VSC)
     -D DISABLE_DIAGNOSTIC_OUTPUT    #Disable diagnostic output for GxEPD2 lib
     -D BOARD_OBP60S3                #Board OBP60 V2.1 with ESP32S3
 #    -D HARDWARE_V20                 #OBP60 hardware revision V2.0
-    -D HARDWARE_V21                 #OBP60 hardware revision V2.1
+#    -D HARDWARE_V21                 #OBP60 hardware revision V2.1
-#    -D HARDWARE_LIGHT               #OBP60 hardware clone
+    -D HARDWARE_LIGHT               #OBP60 hardware clone
 #    -D DISPLAY_GDEW042T2            #old E-Ink display from Waveshare, R10 0.47 ohm
     -D DISPLAY_GDEY042T81           #new E-Ink display from Waveshare, R10 2.2 ohm
 #    -D DISPLAY_GYE042A87            #alternativ E-Ink display from Genyo Optical, R10 2.2 ohm
 #    -D DISPLAY_SE0420NQ04           #alternativ E-Ink display from SID Technology, R10 2.2 ohm
     ${env.build_flags}
 #CONFIG_ESP_TASK_WDT_TIMEOUT_S = 10 #Task Watchdog timeout period (seconds) [1...60] 5 default
-upload_port = /dev/ttyACM0          #OBP60 original
+#upload_port = /dev/ttyACM0          #OBP60 original
-#upload_port = /dev/ttyUSB0          #OBP60 clone
+upload_port = /dev/ttyUSB0          #OBP60 clone
 upload_protocol = esptool           #firmware upload via USB OTG seriell, by first upload need to set the ESP32-S3 in the upload mode with shortcut GND to Pin27 
 upload_speed = 230400
 monitor_speed = 115200