[DEFAULT]
calibration_fields = AWA, AWS, COG, DBT, HDM, PRPOS, RPOS, SOG, STW, TWA, TWS, TWD, WTemp

[deviceName]
label = system name
type = string
default = OBP40
description = system name, used for the access point and for services
check = checkSystemName
category = system

[timeServer]
label = time server
type = string
default = pool.ntp.org
description = NTP time server. Use only one hostname or IP address
category = wifi client
capabilities = obp40:true

[timeZone]
label = Time Zone
type = number
default = 0.00
description = Time zone [UTC -12...+14]
check = checkMinMax
min = -12.0
max = 14.0
category = OBP40 Settings
capabilities = obp40:true

[homeLAT]
label = Home latitude
type = number
default = 0.00000
description = Latitude of boat home location [-90.0...+90.0]
check = checkMinMax
min = -90.0
max = 90.0
category = OBP40 Settings
capabilities = obp40:true

[homeLON]
label = Home longitude
type = number
default = 0.00000
description = Longitude of boat home location [-180.0...+180.0]
check = checkMinMax
min = -180.0
max = 180.0
category = OBP40 Settings
capabilities = obp40:true

[draft]
label = Boat Draft [m]
type = number
default = 0.00
description = The draft of the boat [0...50m]
check = checkMinMax
min = 0.0
max = 50.0
category = OBP40 Settings
capabilities = obp40:true

[chainLength]
label = Anchor Chain Length [m]
type = number
default = 0
description = The length of the anchor chain [0...255m]
check = checkMinMax
min = 0
max = 255
category = OBP40 Settings
capabilities = obp40:true

[fuelTank]
label = Fuel Tank [l]
type = number
default = 0
description = Fuel tank capacity [0...5000l]
check = checkMinMax
min = 0
max = 5000
category = OBP40 Settings
capabilities = obp40:true

[fuelConsumption]
label = Fuel Consuption [l/h]
type = number
default = 0.00
description = Medium fuel consumption [0...1000l/h]
check = checkMinMax
min = 0.0
max = 1000.0
category = OBP40 Settings
capabilities = obp40:true

[waterTank]
label = Water Tank [l]
type = number
default = 0
description = Water tank capacity [0...5000l]
check = checkMinMax
min = 0
max = 5000
category = OBP40 Settings
capabilities = obp40:true

[wasteTank]
label = Waste Tank [l]
type = number
default = 0
description = Waste tank capacity [0...5000l]
check = checkMinMax
min = 0
max = 5000
category = OBP40 Settings
capabilities = obp40:true

[batteryVoltage]
label = Battery Voltage [V]
type = list
default = 12V
description = Battery Voltage [12V|24V]
list = 12V, 24V
category = OBP40 Settings
capabilities = obp40:true

[batteryType]
label = Battery Type
type = list
default = Pb
description = Type of battery [Pb|Gel|AGM|LiFePo4]
list = Pb, Gel, AGM, LiFePo4
category = OBP40 Settings
capabilities = obp40:true

[batteryCapacity]
label = Battery Capacity [Ah]
type = number
default = 0.0
description = Battery capacity [0...10000Ah]
check = checkMinMax
min = 0.0
max = 10000.0
category = OBP40 Settings
capabilities = obp40:true

[solarPower]
label = Solar Power [W]
type = number
default = 0.0
description = Solar power [0...10000W]
check = checkMinMax
min = 0.0
max = 10000.0
category = OBP40 Settings
capabilities = obp40:true

[genPower]
label = Genarator Power [W]
type = number
default = 0.0
description = Generator power [0...10000W]
check = checkMinMax
min = 0.0
max = 10000.0
category = OBP40 Settings
capabilities = obp40:true

[trackStep]
label = angle [deg]
type = number
default = 3.0
description = track step offset [1...12deg]
check = checkMinMax
min = 1.0
max = 12.0
category = OBP40 Settings
capabilities = obp40:true

[calcTrueWnds]
label = Calculate True Wind
type = boolean
default = false
description = If not available, calculate true wind data from appearant wind and other boat data
category = OBP40 Settings
capabilities = obp40:true

[lengthFormat]
label = Length Format
type = list
default = m
description = Length format [m|ft]
list = m, ft
category = OBP40 Units
capabilities = obp40:true

[distanceFormat]
label = Distance Format
type = list
default = nm
description = Distance format [m|km|nm]
list = m, km, nm
category = OBP40 Units
capabilities = obp40:true

[speedFormat]
label = Speed Format
type = list
default = kn
description = Distance format [m/s|km/h|kn]
list = m/s, km/h, kn
category = OBP40 Units
capabilities = obp40:true

[windspeedFormat]
label = Wind Speed Format
type = list
default = kn
description = Wind speed format [m/s|km/h|kn|bft]
list = m/s, km/h, kn, bft
category = OBP40 Units
capabilities = obp40:true

[tempFormat]
label = Temperature Format
type = list
default = C
description = Temperature format [K|C|F]
list = K, C, F
category = OBP40 Units
capabilities = obp40:true

[dateFormat]
label = Date Format
type = list
default = DE
description = Date format [DE|GB|US|ISO] DE: 31.12.2022, GB: 31/12/2022, US: 12/31/2022, ISO: 2022-12-31
list = DE, GB, US, ISO
category = OBP40 Units
capabilities = obp40:true

[cpuSpeed]
label = CPU Speed [MHz]
type = list
default = 160
description = CPU speed in MHz [80|160|240]
list = 80, 160, 240
category = OBP40 Hardware
capabilities = obp40:true

[useRTC]
label = RTC Modul
type = list
default = off
description = Use RTC module type [off|DS1388]
list = off, DS1388
category = OBP40 Hardware
capabilities = obp40:true

[useGPS]
label = GPS Sensor
type = list
default = off
description = Use internal GPS module type [off|NEO-6M|NEO-M8N|ATGM336H]
list = off, NEO-6M, NEO-M8N, ATGM336H
category = OBP40 Hardware
capabilities = obp40:true

[hdopAccuracy]
label = HDOP Accuracy [m]
type = number
default = 20
description = HDOP ccuracy in m for a valid GPS signal [1...50]
check = checkMinMax
min = 1
max = 50
category = OBP40 Hardware
capabilities = obp40:true

[useEnvSensor]
label = Env. Sensor
type = list
default = off
description = Use internal or external environment sensor via I2C bus [off|BME280|BMP280|BMP180|BMP085|HTU21|SHT21]
list = off, BME280, BMP280, BMP180, BMP085, HTU21, SHT21
category = OBP40 Hardware
capabilities = obp40:true

[usePowSensor1]
label = Battery Sensor
type = list
default = off
description = Use external power management sensor via I2C bus for battery [off|INA219|INA226|]
list = off, INA219, INA226
category = OBP40 Hardware
capabilities = obp40:true

[shunt1]
label = Battery Shunt
type = list
default = 10
description = Shunt current value [10A|50A|100A|200A|300A|400A|500A]
list = 10, 50, 100, 200, 300, 400, 500
category = OBP40 Hardware
capabilities = obp40:true

[usePowSensor2]
label = Solar Sensor
type = list
default = off
description = Use external power management sensor via I2C bus for solar panels [off|INA219|INA226|]
list = off, INA219, INA226
category = OBP40 Hardware
capabilities = obp40:true

[shunt2]
label = Solar Shunt
type = list
default = 10
description = Shunt current value [10A|50A|100A|200A|300A|400A|500A]
list = 10, 50, 100, 200, 300, 400, 500
category = OBP40 Hardware
capabilities = obp40:true

[usePowSensor3]
label = Gen. Sensor
type = list
default = off
description = Use external power management sensor via I2C bus for generator [off|INA219|INA226|]
list = off, INA219, INA226
category = OBP40 Hardware
capabilities = obp40:true

[shunt3]
label = Gen. Shunt
type = list
default = 10
description = Shunt current value [10A|50A|100A|200A|300A|400A|500A] @ 75mV
list = 10, 50, 100, 200, 300, 400, 500
category = OBP40 Hardware
capabilities = obp40:true

[useRotSensor]
label = Rot. Sensor
type = list
default = off
description = Use external rotation sensor via I2C bus [off|AS5600]
list = off, AS5600
category = OBP40 Hardware
capabilities = obp40:true

[rotFunction]
label = Rot. Function
type = list
default = off
description = Function for rotation sensor [off|Rudder|Wind|Mast|Keel|Trim|Boom]
list = off, Rudder, Wind, Mast, Keel, Trim, Boom
category = OBP40 Hardware
capabilities = obp40:true

[rotOffset]
label = Rot. Offset
type = number
default = 0
description = Offset for rotation sensor [-180°...+180°]
check = checkMinMax
min = -180
max = 180
category = OBP40 Hardware
capabilities = obp40:true

[rollLimit]
label = Roll Limit
type = number
default = 25
description = Limit violation for roll angle [-90°...+90°]
check = checkMinMax
min = -90
max = 90
category = OBP40 Hardware
capabilities = obp40:true

[rollOffset]
label = Roll Offset
type = number
default = 0
description = Roll offset angle [-45°...+45°]
check = checkMinMax
min = -45
max = 45
category = OBP40 Hardware
capabilities = obp40:true

[pitchOffset]
label = Pitch Offset
type = number
default = 0
description = Pitch offset angle [-45°...+45°]
check = checkMinMax
min = -45
max = 45
category = OBP40 Hardware
capabilities = obp40:true

[useTempSensor]
label = Temp. Sensor
type = boolean
default = off
description = Use max. 8 external 1Wire devices [off|DS18B20]
list = off, DS18B20
category = OBP40 Hardware
capabilities = obp40:true

[useSDCard]
label = SD Card
type = boolean
default = false
description = Use internal SD card interface [off|on]
category = OBP40 Hardware
capabilities = obp40:true

[powerMode]
label = Power Mode
type = list
default = Max Power
description = Settings for power mode
list = Max Power, Only 5.0V, Min Power
category = OBP40 Hardware
capabilities = obp40:true

[underVoltage]
label = Undervoltage
type = boolean
default = false
description = Switch off device if LiPo voltage drops below 3.65V [on|off]
category = OBP40 Hardware
capabilities = obp40:true

[useSimuData]
label = Simulation Data
type = boolean
default = false
description = Use simulation data when bus data are missing [on|off]
category = OBP40 Hardware
capabilities = obp40:true

[tSensitivity]
label = Touch Sensitivity [%%]
type = number
default = 100
description = Touch sensitivity [0...100%%] for sensor buttons
check = checkMinMax
min = 0
max = 100
category = OBP40 Calibrations
capabilities = obp40:false

[vOffset]
label = VSensor Offset
type = number
default = -1.00
description = Offset for internal voltage sensor (ESP32)
category = OBP40 Calibrations
capabilities = obp40:true

[vSlope]
label = VSensor Slope
type = number
default = 1.00
description = Slope for internal voltage sensor (ESP32)
category = OBP40 Calibrations
capabilities = obp40:true

[calInstance1]
label = Calibration Data Instance 1
type = list
default = ---
description = Data instance for calibration
list = ---, %(calibration_fields)s
category = OBP40 Calibrations
capabilities = obp40:true

[calOffset1]
label = Data Instance 1 Calibration Offset
type = number
default = 0.00
description = Offset for data instance 1
category = OBP40 Calibrations
capabilities = obp40:true
condition = calInstance1 IN %(calibration_fields)s

[calSlope1]
label = Data Instance 1 Calibration Slope
type = number
default = 1.00
description = Slope for data instance 1
category = OBP40 Calibrations
capabilities = obp40:true
condition = calInstance1 IN %(calibration_fields)s

[calSmooth1]
label = Data Instance 1 Smoothing
type = number
default = 0
description = Smoothing factor [0..10]; 0 = no smoothing
check = checkMinMax
min = 0
max = 10
category = OBP40 Calibrations
capabilities = obp40:true
condition = calInstance1 IN %(calibration_fields)s

[calInstance2]
label = Calibration Data Instance 2
type = list
default = ---
description = Data instance for calibration
list = ---, %(calibration_fields)s
category = OBP40 Calibrations
capabilities = obp40:true

[calOffset2]
label = Data Instance 2 Calibration Offset
type = number
default = 0.00
description = Offset for data instance 2
category = OBP40 Calibrations
capabilities = obp40:true
condition = calInstance2 IN %(calibration_fields)s

[calSlope2]
label = Data Instance 2 Calibration Slope
type = number
default = 1.00
description = Slope for data instance 2
category = OBP40 Calibrations
capabilities = obp40:true
condition = calInstance2 IN %(calibration_fields)s

[calSmooth2]
label = Data Instance 2 Smoothing
type = number
default = 0
description = Smoothing factor [0..10]; 0 = no smoothing
check = checkMinMax
min = 0
max = 10
category = OBP40 Calibrations
capabilities = obp40:true
condition = calInstance2 IN %(calibration_fields)s

[calInstance3]
label = Calibration Data Instance 3
type = list
default = ---
description = Data instance for calibration
list = ---, %(calibration_fields)s
category = OBP40 Calibrations
capabilities = obp40:true

[calOffset3]
label = Data Instance 3 Calibration Offset
type = number
default = 0.00
description = Offset for data instance 3
category = OBP40 Calibrations
capabilities = obp40:true
condition = calinstance3 IN %(calibration_fields)s

[calSlope3]
label = Data Instance 3 Calibration Slope
type = number
default = 1.00
description = Slope for data instance 3
category = OBP40 Calibrations
capabilities = obp40:true
condition = calinstance3 IN %(calibration_fields)s

[calSmooth3]
label = Data Instance 3 Smoothing
type = number
default = 0
description = Smoothing factor [0..10]; 0 = no smoothing
check = checkMinMax
min = 0
max = 10
category = OBP40 Calibrations
capabilities = obp40:true
condition = calinstance3 IN %(calibration_fields)s

[display]
label = Display Mode
type = list
default = Logo + QR Code
description = Settings for startup display
list = White Screen, Logo, Logo + QR Code, Off
category = OBP40 Display
capabilities = obp40:true

[displaycolor]
label = Inverted Display Mode
type = list
default = Normal
description = Invert display to white letters on black background [Normal|Inverse]
list = Normal, Inverse
category = OBP40 Display
capabilities = obp40:true

[statusLine]
label = Status Line
type = boolean
default = true
description = Show status line [on|off]
category = OBP40 Display
capabilities = obp40:true

[timeSource]
label = Status Time Source
type = list
default = GPS
description = Data source for date and time display in status line [RTC|iRTC|GPS]
dict =
	iRTC:Internal real time clock (iRTC)
	RTC:External real time clock (RTC)
	GPS:External time via bus (GPS)
category = OBP40 Display
capabilities = obp40:true

[refresh]
label = Refresh
type = boolean
default = true
description = Refresh e-paper display after each new page request to reduce ghost effects [on|off]
category = OBP40 Display
capabilities = obp40:true

[fastRefresh]
label = Fast Refresh
type = boolean
default = false
description = Fast refresh for e-paper display [on|off]
category = OBP40 Display
capabilities = obp40:true

[fullRefreshTime]
label = Full Refresh Time [min]
type = number
default = 1
description = E-Paper full refresh time all [1...10 min]
check = checkMinMax
min = 1
max = 10
category = OBP40 Display
capabilities = obp40:true

[holdvalues]
label = Hold Values
type = boolean
default = false
description = Retain old values when data stream stops [on|off]
category = OBP40 Display
capabilities = obp40:true

[valueprecision]
label = Display value precision
type = list
default = 2
description = Maximum number of decimal places to display [1|2]
list = 1, 2
category = OBP40 Display
capabilities = obp40:true

[headerFormat]
label = Header Format
type = list
default = TEXT
description = Header format: Text or Symbols
dict =
	TEXT:Text
	ICON:Symbols
category = OBP40 Display
capabilities = obp40:true

[backlight]
label = Backlight Mode
type = list
default = off
description = Settings for automatic backlight mode
list = Off, Control by Sun, Control by Bus, Control by Time, Control by Key, On
category = OBP40 Display
capabilities = obp40:false

[blColor]
label = Backlight Color
type = list
default = Red
description = Backlight color
list = Red, Orange, Yellow, Green, Blue, Aqua, Violet, White
category = OBP40 Display
capabilities = obp40:false

[blBrightness]
label = Brightness [%%]
type = number
default = 50
description = Backlight brightness [20...100%%]
check = checkMinMax
min = 20
max = 100
category = OBP40 Display
capabilities = obp40:false

[flashLED]
label = Flash LED Mode
type = list
default = Off
description = Settings for flash LED
list = Off, Bus Data, GPS Fix Lost, Limit Violation
category = OBP40 Display
capabilities = obp40:false

[buzzerError]
label = Buzzer Error
type = boolean
default = false
description = Sound on error [on|off]
category = OBP40 Buzzer
capabilities = obp40:false

[buzzerGps]
label = Buzzer GPS Fix
type = boolean
default = false
description = Sound on missing or lost GPS fix
category = OBP40 Buzzer
capabilities = obp40:false

[buzzerLim]
label = Buzzer by Limits
type = boolean
default = false
description = Sound on limit violation
category = OBP40 Buzzer
capabilities = obp40:false

[buzzerMode]
label = Buzzer Mode
type = list
default = Off
description = Settings for buzzer behaviour
list = Off, Short Single Beep, Longer Single Beep, Beep until Confirmation
category = OBP40 Buzzer
capabilities = obp40:false

[buzzerPower]
label = Buzzer Power [%%]
type = number
default = 50
description = Buzzer loudness [0...100%%]
check = checkMinMax
min = 0
max = 100
category = OBP40 Buzzer
capabilities = obp40:false

[visiblePages]
label = Number of Pages
type = number
default = 10
description = Number of visible data pages [1...10]
check = checkMinMax
min = 1
max = 10
category = OBP40 Pages
capabilities = obp40:true

[startPage]
label = Start Page
type = number
default = 1
description = First page number to display after device startup
check = checkMinMax
min = 1
max = 10
category = OBP40 Pages
capabilities = obp40:true

[systemPage]
label = System Page
type = boolean
default = false
description = Use wheel button for system page or direct deep sleep mode
category = OBP40 Pages
capabilities = obp40:true

[imageFormat]
label = Screenshot Format
type = list
default = PBM
description = Graphics file format for screenshots [GIF|PBM|BMP]
dict =
	GIF:Compressed image (GIF)
	PBM:Portable bitmap (PBM)
	BMP:Windows bitmap (BMP)
category = OBP40 Pages
capabilities = obp40:true