[
{
"name": "systemName",
"label": "system name",
"type": "string",
"default": "ESP32NMEA2K",
"check": "checkSystemName",
"description": "system name, used for the access point and for services",
"category": "system"
},
{
"name": "stopApTime",
"type": "number",
"default": "0",
"check": "checkMinMax",
"description": "stop the access point after that many minutes if not used",
"category": "system"
},
{
"name": "apPassword",
"type": "password",
"default": "esp32nmea2k",
"check": "checkApPass",
"description": "set the password for the Wifi access point",
"category": "system",
"capabilities":{"apPwChange":["true"]}
},
{
"name": "apIp",
"type": "string",
"default":"192.168.15.1",
"check": "checkApIp",
"description": "The IP address for the access point. Clients will get addresses within the same subnet.",
"category":"system"
},
{
"name": "apMask",
"type": "string",
"default":"255.255.255.0",
"check": "checkNetMask",
"description": "The net mask for the access point",
"category":"system"
},
{
"name": "useAdminPass",
"type": "boolean",
"default": "true",
"description": "use a password for config modifications",
"category": "system"
},
{
"name": "adminPassword",
"type": "password",
"default": "esp32admin",
"check": "checkAdminPass",
"description": "set the password for config modifications",
"category": "system"
},
{
"name": "showInvalidData",
"label": "show all data",
"type": "boolean",
"default": "true",
"description": "show also not received items on data page",
"category": "system"
},
{
"name":"logLevel",
"label": "log level",
"type":"list",
"default":"0",
"list": [
{"l":"off","v":"-1"},
{"l":"error","v":"0"},
{"l":"log","v":"1"},
{"l":"debug","v":"3"}
],
"description": "log level at the USB port",
"category":"system"
},
{
"name":"ledBrightness",
"label":"led brightness",
"type":"number",
"default":64,
"min":0,
"max":255,
"description":"the brightness of the led (0..255)",
"category":"system"
},
{
"name": "talkerId",
"label": "NMEA0183 ID",
"type": "list",
"default": "GP",
"list": [
"AB",
"AD",
"AG",
"AP",
"AI",
"AN",
"AR",
"AS",
"AT",
"AX",
"BI",
"BN",
"CA",
"CD",
"CR",
"CS",
"CT",
"CV",
"CX",
"DF",
"DU",
"DP",
"EC",
"EI",
"EP",
"ER",
"FD",
"FE",
"FR",
"FS",
"GA",
"GB",
"GI",
"GL",
"GN",
"GP",
"GQ",
"HC",
"HE",
"HF",
"HN",
"HD",
"HS",
"II",
"IN",
"JA",
"JB",
"JC",
"JD",
"JE",
"JF",
"JG",
"JH",
"LC",
"NL",
"NV",
"RA",
"RB",
"RC",
"RI",
"SA",
"SC",
"SD",
"SG",
"SN",
"SS",
"TC",
"TI",
"UP",
"VD",
"VM",
"VW",
"VA",
"VS",
"VT",
"VR",
"WD",
"WI",
"WL",
"YX",
"ZA",
"ZC",
"ZQ",
"ZV"
],
"description": "the talkerId used in generated NMEA0183 records",
"category": "converter"
},
{
"name": "minXdrInterval",
"label":"min XDR interval",
"type": "number",
"default": "100",
"check": "checkMinMax",
"min": 10,
"description": "min interval in ms between 2 XDR records with the same transducer (> 10)",
"category": "converter"
},
{
"name": "min2KInterval",
"label":"min N2K interval",
"type": "number",
"default": "50",
"check": "checkMinMax",
"min": 5,
"description": "min interval in ms between 2 NMEA 2000 records with the same PGN and the same source (> 5)",
"category": "converter"
},
{
"name":"sendN2k",
"label":"NMEA2000 out",
"type":"boolean",
"default":"true",
"description":"send out the converted data on the NMEA2000 bus\nIf set to off the converted data will still be shown at the data tab.",
"category":"converter"
},
{
"name":"sendRMCi",
"label":"send RMC interval",
"type": "number",
"description":"interval (ms) to automatically send an RMC if we have valid position data (min 100ms, set to 0 to disable)",
"default":"1000",
"category":"converter"
},
{
"name": "checkRMCt",
"label": "check RMC time",
"type": "number",
"description": "start sending RMC if we did not see an external RMC after this much ms",
"default": "4000",
"min": 1000,
"check": "checkMinMax",
"category": "converter"
},
{
"name": "timeouts",
"type": "array",
"replace": [
{
"n": "Default",
"d": "4000",
"l": "default",
"t": "NMEA"
},
{
"n": "Sensor",
"d": "60000",
"l": "sensor",
"t": "sensor"
},
{
"n": "Long",
"d": "32000",
"l": "long",
"t": "special NMEA"
},
{
"n": "Ais",
"d": "120000",
"l": "ais",
"t": "ais"
}
],
"children": [
{
"name": "timo$n",
"label": "timeout $l",
"default": "$d",
"type": "number",
"description": "data timeouts(ms) for $t data",
"category": "converter"
}
]
},
{
"name": "stbRudderI",
"label":"stb rudder instance",
"type": "number",
"default": "0",
"check": "checkMinMax",
"min": 0,
"max": 253,
"description": "the n2k instance to be used as starboard(main) rudder 0...253",
"category": "converter"
},
{
"name": "portRudderI",
"label":"port rudder instance",
"type": "number",
"default": "-1",
"check": "checkMinMax",
"min": -1,
"max": 253,
"description": "the n2k instance to be used as port rudder 0...253, -1 to disable",
"category": "converter"
},
{
"name": "windmappings",
"type": "array",
"replace":[
{
"n": "tng",
"l": "true north ground",
"t": "True_North=0",
"d": "twa_tws"
},
{
"n": "mgd",
"l": "magnetic ground dir",
"t": "Magnetic=1",
"d":""
},
{
"n": "awa",
"l": "apparent angle",
"t": "Apparent=2",
"d":"awa_aws"
},
{
"n": "gna",
"l": "ground angle",
"t": "True_boat=3",
"d": ""
},
{
"n": "tra",
"l": "true angle",
"t": "True_water=4",
"d":""
}
],
"children":[
{
"name":"windm$n",
"type":"list",
"description": "mapping of the PGN 130306 wind reference $t",
"label":"wind $l",
"list":[
{"l": "-unset-","v":""},
{"l": "TWA/TWS","v":"twa_tws"},
{"l": "AWA/AWS", "v":"awa_aws"},
{"l": "TWD/TWS","v":"twd_tws"}
],
"category":"converter",
"default":"$d"
}
]
},
{
"name": "winst312",
"label": "130312 WTemp iid",
"type": "number",
"check": "checkMinMax",
"min": -1,
"max": 256,
"description": "the temp instance of PGN 130312 used for water temperature (0...255), use -1 for none, 256 for any",
"default": "256",
"category":"converter"
},
{
"name": "usbActisense",
"label": "USB mode",
"type": "list",
"default": "false",
"description": "send/receive NMEA0183 or actisense format on USB",
"list": [
{"l":"actisense","v":"true"},
{"l":"nmea0183","v":"false"}
],
"category": "usb port"
},
{
"name": "usbBaud",
"label": "USB baud rate",
"type": "list",
"default": "115200",
"description": "baud rate for the USB port",
"list": [
1200,
2400,
4800,
9600,
14400,
19200,
28800,
38400,
57600,
115200,
230400,
460800
],
"category": "usb port"
},
{
"name": "sendUsb",
"label": "NMEA to USB",
"type": "boolean",
"default": "true",
"description": "send out NMEA data on the USB port",
"category": "usb port",
"condition":{"usbActisense":"false"}
},
{
"name": "receiveUsb",
"label": "NMEA from USB",
"type": "boolean",
"default": "true",
"description": "receive NMEA data on the USB port",
"category": "usb port",
"condition":{"usbActisense":"false"}
},
{
"name": "usbToN2k",
"label": "USB to NMEA2000",
"type": "boolean",
"default": "true",
"description": "convert NMEA0183 from the USB port to NMEA2000",
"category": "usb port",
"condition":{"usbActisense":"false"}
},
{
"name": "usbReadFilter",
"label": "USB read Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when reading from USB\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"category": "usb port",
"condition":{"usbActisense":"false"}
},
{
"name": "usbWriteFilter",
"label": "USB write Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when writing to USB\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"category": "usb port",
"condition":{"usbActisense":"false"}
},
{
"name": "usbActSend",
"label": "N2K to USB actisense",
"type": "boolean",
"default": "true",
"description": "send out N2k data on the USB port in actisense format",
"category": "usb port",
"condition":{"usbActisense":"true"}
},
{
"name": "serialDirection",
"label": "serial direction",
"type": "list",
"default": "receive",
"list": [
"send",
"receive",
"off"
],
"description": "use the serial port to send or receive data",
"capabilities": {
"serialmode": [
"UNI"
]
},
"category": "serial port"
},
{
"name": "serialBaud",
"label": "serial baud rate",
"type": "list",
"default": "115200",
"description": "baud rate for the serial port",
"list": [
1200,
2400,
4800,
9600,
14400,
19200,
28800,
38400,
57600,
115200,
230400,
460800
],
"capabilities": {
"serialmode": [
"RX",
"TX",
"UNI",
"BI"
]
},
"category": "serial port"
},
{
"name": "sendSerial",
"label": "NMEA to Serial",
"type": "boolean",
"default": "true",
"description": "send out NMEA data on the serial port",
"capabilities": {
"serialmode": [
"TX",
"BI"
]
},
"category": "serial port"
},
{
"name": "receiveSerial",
"label": "NMEA from Serial",
"type": "boolean",
"default": "true",
"description": "receive NMEA data on the serial port",
"capabilities": {
"serialmode": [
"RX",
"BI"
]
},
"category": "serial port"
},
{
"name": "serialToN2k",
"label": "serial to NMEA2000",
"type": "boolean",
"default": "true",
"description": "convert NMEA0183 from the serial port to NMEA2000",
"capabilities": {
"serialmode": [
"RX",
"BI",
"UNI"
]
},
"category": "serial port"
},
{
"name": "serialReadF",
"label": "serial read Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when reading from serial\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"capabilities": {
"serialmode": [
"RX",
"BI",
"UNI"
]
},
"category": "serial port"
},
{
"name": "serialWriteF",
"label": "serial write Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when writing to serial\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"capabilities": {
"serialmode": [
"TX",
"BI",
"UNI"
]
},
"category": "serial port"
}
,
{
"name": "serial2Dir",
"label": "serial2 direction",
"type": "list",
"default": "receive",
"list": [
"send",
"receive",
"off"
],
"description": "use the serial2 port to send or receive data",
"capabilities": {
"serial2mode": [
"UNI"
]
},
"category": "serial2 port"
},
{
"name": "serial2Baud",
"label": "serial2 baud rate",
"type": "list",
"default": "115200",
"description": "baud rate for the serial port 2",
"list": [
1200,
2400,
4800,
9600,
14400,
19200,
28800,
38400,
57600,
115200,
230400,
460800
],
"capabilities": {
"serial2mode": [
"RX",
"TX",
"UNI",
"BI"
]
},
"category": "serial2 port"
},
{
"name": "sendSerial2",
"label": "NMEA to Serial2",
"type": "boolean",
"default": "true",
"description": "send out NMEA data on the serial port 2",
"capabilities": {
"serial2mode": [
"TX",
"BI"
]
},
"category": "serial2 port"
},
{
"name": "receiveSerial2",
"label": "NMEA from Serial2",
"type": "boolean",
"default": "true",
"description": "receive NMEA data on the serial port 2",
"capabilities": {
"serial2mode": [
"RX",
"BI"
]
},
"category": "serial2 port"
},
{
"name": "serial2ToN2k",
"label": "serial2 to NMEA2000",
"type": "boolean",
"default": "true",
"description": "convert NMEA0183 from the serial port 2 to NMEA2000",
"capabilities": {
"serial2mode": [
"RX",
"BI",
"UNI"
]
},
"category": "serial2 port"
},
{
"name": "serial2ReadF",
"label": "serial2 read Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when reading from serial2\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"capabilities": {
"serial2mode": [
"RX",
"BI",
"UNI"
]
},
"category": "serial2 port"
},
{
"name": "serial2WriteF",
"label": "serial2 write Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when writing to serial2\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"capabilities": {
"serial2mode": [
"TX",
"BI",
"UNI"
]
},
"category": "serial2 port"
},
{
"name": "serverPort",
"label": "TCP port",
"type": "number",
"default": "10110",
"check":"checkPort",
"description": "the TCP port we listen on",
"category": "TCP server"
},
{
"name": "maxClients",
"label": "max. TCP clients",
"type": "number",
"default": "6",
"check": "checkMinMax",
"min": 0,
"max": 6,
"description": "the number of clients we allow to connect to us",
"category": "TCP server"
},
{
"name": "sendTCP",
"label": "NMEA0183 out",
"type": "boolean",
"default": "true",
"description": "send out NMEA data to connected TCP clients",
"category": "TCP server"
},
{
"name": "readTCP",
"label": "NMEA0183 in",
"type": "boolean",
"default": "true",
"description": "receive NMEA data from connected TCP clients",
"category": "TCP server"
},
{
"name": "tcpToN2k",
"label": "to NMEA2000",
"type": "boolean",
"default": "true",
"description": "convert NMEA0183 from TCP clients to NMEA2000",
"category": "TCP server"
},
{
"name": "tcpReadFilter",
"label": "NMEA read Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when reading from TCP\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"category": "TCP server"
},
{
"name": "tcpWriteFilter",
"label": "NMEA write Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when writing to TCP\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"category": "TCP server"
},
{
"name": "sendSeasmart",
"label": "Seasmart out",
"type": "boolean",
"default": "false",
"description": "send NMEA2000 as seasmart to connected TCP clients",
"category": "TCP server"
},
{
"name": "tclEnabled",
"label": "enable",
"type": "boolean",
"default": "false",
"description":"enable the TCP client",
"category":"TCP client"
},
{
"name": "remotePort",
"label": "remote port",
"type": "number",
"default": "10110",
"check":"checkPort",
"description": "the TCP port we connect to",
"category": "TCP client",
"condition":{
"tclEnabled":"true"
}
},
{
"name": "remoteAddress",
"label": "remote address",
"type": "string",
"default": "",
"check": "checkIpAddress",
"description": "the IP address we connect to in the form 192.168.1.2\nor an MDNS name like ESP32NMEA2K.local",
"category": "TCP client",
"condition":{
"tclEnabled":"true"
}
},
{
"name": "sendTCL",
"label": "NMEA0183 out",
"type": "boolean",
"default": "true",
"description": "send out NMEA data to remote TCP server",
"category": "TCP client",
"condition":{
"tclEnabled":"true"
}
},
{
"name": "readTCL",
"label": "NMEA0183 in",
"type": "boolean",
"default": "true",
"description": "receive NMEA data from remote TCP server",
"category": "TCP client",
"condition":{
"tclEnabled":"true"
}
},
{
"name": "tclToN2k",
"label": "to NMEA2000",
"type": "boolean",
"default": "true",
"description": "convert NMEA0183 from remote TCP server to NMEA2000",
"category": "TCP client",
"condition":{
"tclEnabled":"true"
}
},
{
"name": "tclReadFilter",
"label": "NMEA read Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when reading from remote TCP server\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"category": "TCP client",
"condition":{
"tclEnabled":"true"
}
},
{
"name": "tclWriteFilter",
"label": "NMEA write Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when writing to remote TCP server\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"category": "TCP client",
"condition":{
"tclEnabled":"true"
}
},
{
"name": "tclSeasmart",
"label": "Seasmart out",
"type": "boolean",
"default": "false",
"description": "send NMEA2000 as seasmart to remote TCP server",
"category": "TCP client",
"condition":{
"tclEnabled":"true"
}
},
{
"name": "udpwEnabled",
"label": "enable",
"type": "boolean",
"default": "false",
"description":"enable the UDP writer",
"category":"UDP writer"
},
{
"name": "udpwPort",
"label": "remote port",
"type": "number",
"default": "10110",
"description": "the UDP port we send to",
"check":"checkPort",
"category": "UDP writer",
"condition":{
"udpwEnabled":"true"
}
},
{
"name": "udpwType",
"label": "remote address type",
"type": "list",
"default": "0",
"description": "to which networks/addresses do we send\nbc-all: send broadcast to AP and wifi client network\nbc-ap: send broadcast to access point only\nbc-cli: send broadcast to wifi client network\nnormal: normal target address\nmc-all: multicast to AP and wifi client network\nmc-ap:multicast to AP network\nmc-cli: muticast to wifi client network",
"list":[
{"l":"bc-all","v":"0"},
{"l":"bc-ap","v":"1"},
{"l":"bc-cli","v":"2"},
{"l":"normal","v":"3"},
{"l":"mc-all","v":"4"},
{"l":"mc-ap","v":"5"},
{"l":"mc-cli","v":"6"}
],
"category": "UDP writer",
"condition":{
"udpwEnabled":"true"
}
},
{
"name": "udpwAddress",
"label": "remote address",
"type": "string",
"default": "",
"check": "checkIpAddress",
"description": "the IP address we connect to in the form 192.168.1.2",
"category": "UDP writer",
"condition":{
"udpwType":["3"],
"udpwEnabled":"true"
}
},
{
"name": "udpwMC",
"label": "multicast address",
"type": "string",
"default": "224.0.0.1",
"check": "checkMCAddress",
"description": "the multicast address we send to 224.0.0.0...239.255.255.255",
"category": "UDP writer",
"condition":{
"udpwType":["4","5","6"],
"udpwEnabled":"true"
}
},
{
"name": "udpwWriteFilter",
"label": "NMEA write Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when writing to remote UDP server\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"category": "UDP writer",
"condition":{
"udpwEnabled":"true"
}
},
{
"name": "udpwSeasmart",
"label": "Seasmart out",
"type": "boolean",
"default": "false",
"description": "send NMEA2000 as seasmart to remote UDP server",
"category": "UDP writer",
"condition":{
"udpwEnabled":"true"
}
},
{
"name": "udprEnabled",
"label": "enable",
"type": "boolean",
"default": "false",
"description":"enable the UDP reader",
"category":"UDP reader"
},
{
"name": "udprPort",
"label": "local port",
"type": "number",
"default": "10110",
"check":"checkPort",
"description": "the UDP port we listen on",
"category": "UDP reader",
"condition":{
"udprEnabled":"true"
}
},
{
"name": "udprType",
"label": "local address type",
"type": "list",
"default": "0",
"description": "to which networks/addresses do we listen\nall: listen on AP and wifi client network\nap: listen in access point network only\ncli: listen in wifi client network\nmc-all: receive multicast from AP and wifi client network\nmc-ap:receive multicast from AP network\nmc-cli: receive muticast wifi client network",
"list":[
{"l":"all","v":"0"},
{"l":"ap","v":"1"},
{"l":"cli","v":"2"},
{"l":"mc-all","v":"4"},
{"l":"mc-ap","v":"5"},
{"l":"mc-cli","v":"6"}
],
"category": "UDP reader",
"condition":{
"udprEnabled":"true"
}
},
{
"name": "udprToN2k",
"label": "to NMEA2000",
"type": "boolean",
"default": "true",
"description": "convert NMEA0183 from UDP to NMEA2000",
"category": "UDP reader",
"condition":{
"udprEnabled":"true"
}
},
{
"name": "udprMC",
"label": "multicast address",
"type": "string",
"default": "224.0.0.1",
"check": "checkMCAddress",
"description": "the multicast address we listen on 224.0.0.0...239.255.255.255",
"category": "UDP reader",
"condition":{
"udprType":["4","5","6"],
"udprEnabled":"true"
}
},
{
"name": "udprReadFilter",
"label": "NMEA read Filter",
"type": "filter",
"default": "",
"description": "filter for NMEA0183 data when receiving\nselect aison|aisoff, set a whitelist or a blacklist with NMEA sentences like RMC,RMB",
"category": "UDP reader",
"condition":{
"udprEnabled":"true"
}
},
{
"name": "wifiClient",
"label": "wifi client",
"type": "boolean",
"default": "false",
"description": "connect to an external WIFI network",
"category": "wifi client"
},
{
"name": "wifiSSID",
"label": "wifi client SSID",
"type": "string",
"default": "",
"check": "checkSSID",
"description": "the SSID for an external WIFI network",
"category": "wifi client"
},
{
"name": "wifiPass",
"label": "wifi client password",
"type": "password",
"default": "",
"description": "the password for an external WIFI network",
"category": "wifi client"
},
{
"name": "XDR1",
"label": "XDR1",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr1"
},
{
"name": "XDR2",
"label": "XDR2",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr2"
},
{
"name": "XDR3",
"label": "XDR3",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr3"
},
{
"name": "XDR4",
"label": "XDR4",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr4"
},
{
"name": "XDR5",
"label": "XDR5",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr5"
},
{
"name": "XDR6",
"label": "XDR6",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr6"
},
{
"name": "XDR7",
"label": "XDR7",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr7"
},
{
"name": "XDR8",
"label": "XDR8",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr8"
},
{
"name": "XDR9",
"label": "XDR9",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr9"
},
{
"name": "XDR10",
"label": "XDR10",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr10"
},
{
"name": "XDR11",
"label": "XDR11",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr11"
},
{
"name": "XDR12",
"label": "XDR12",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr12"
},
{
"name": "XDR13",
"label": "XDR13",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr13"
},
{
"name": "XDR14",
"label": "XDR14",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr14"
},
{
"name": "XDR15",
"label": "XDR15",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr15"
},
{
"name": "XDR16",
"label": "XDR16",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr16"
},
{
"name": "XDR17",
"label": "XDR17",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr17"
},
{
"name": "XDR18",
"label": "XDR18",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr18"
},
{
"name": "XDR19",
"label": "XDR19",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr19"
},
{
"name": "XDR20",
"label": "XDR20",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr20"
},
{
"name": "XDR21",
"label": "XDR21",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr21"
},
{
"name": "XDR22",
"label": "XDR22",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr22"
},
{
"name": "XDR23",
"label": "XDR23",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr23"
},
{
"name": "XDR24",
"label": "XDR24",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr24"
},
{
"name": "XDR25",
"label": "XDR25",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr25"
},
{
"name": "XDR26",
"label": "XDR26",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr26"
},
{
"name": "XDR27",
"label": "XDR27",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr27"
},
{
"name": "XDR28",
"label": "XDR28",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr28"
},
{
"name": "XDR29",
"label": "XDR29",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr29"
},
{
"name": "XDR30",
"label": "XDR30",
"type": "xdr",
"default": "",
"check": "checkXDR",
"category": "xdr30"
}
]